Auto Parts Search

We have info for following modifications of 2006 Subaru B9 Tribeca
- 2006 Subaru B9 Tribeca Limited 3.0 H6 GAS, CC:3000, Fuel Injection
- 2006 Subaru B9 Tribeca 3.0 H6 GAS, CC:3000, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Subaru B9 Tribeca AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Subaru B9 Tribeca cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2006 Subaru B9 Tribeca 3.0 H6 GAS
Front
- Disconnect battery ground cable.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove brake caliper bolts and support caliper to strut housing using mechanics wire.
- Remove disc brake rotor. If brake rotor is difficult to remove, drive 8mm bolt into threaded end of rotor, then remove the rotor. Reference mark surface of hub and disc rotor before removing disc rotor to prevent confusion during installation.
- Unstake hub nut using suitable tool.
- Remove driveshaft locknut from front hub while depressing brak...
CLICK HERE TO GET FULL ACCESS TO 2006 Subaru B9 Tribeca DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Subaru B9 Tribeca AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Subaru B9 Tribeca cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2006 Subaru B9 Tribeca Limited 3.0 H6 GAS
Front
- Disconnect battery ground cable.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove brake caliper bolts and support caliper to strut housing using mechanics wire.
- Remove disc brake rotor. If brake rotor is difficult to remove, drive 8mm bolt into threaded end of rotor, then remove the rotor. Reference mark surface of hub and disc rotor before removing disc rotor to prevent confusion during installation.
- Unstake hub nut using suitable tool.
- Remove driveshaft locknut from front hub while depressing brak...
CLICK HERE TO GET FULL ACCESS TO 2006 Subaru B9 Tribeca DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |