Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Toyota Tacoma car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Toyota Tacoma automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Toyota Tacoma
- 2006 Toyota Tacoma 2.7 L4 GAS, CC:2694, Fuel Injection
- 2006 Toyota Tacoma 4.0 V6 GAS, CC:3956, Fuel Injection
- 2006 Toyota Tacoma X-RUNNER 4.0 V6 GAS, CC:3956, Fuel Injection
- 2006 Toyota Tacoma PRE Runner 2.7 L4 GAS, CC:2694, Fuel Injection
- 2006 Toyota Tacoma PRE Runner 4.0 V6 GAS, CC:3956, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Tacoma AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Tacoma cars and light trucks sold in the U.S. from 1990+.
Toyota -> Anti-Lock Brake System (ABS)/Vehicle Stability Control (VSC) System Warning Lamp -> 2002-09 Tacoma
Vehicle: 2006 Toyota Tacoma 2.7 L4 GAS
The anti-lock warning lamp is used to warn of a system fault. The lamp will be lit during engine start-up, but should go out when the self-diagnostic system verifies proper anti-lock operation. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After system diagnosis and repair are complete, the lamp can be reset using the following procedures:
- Place ignition switch ...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Tacoma MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Tacoma AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Tacoma cars and light trucks sold in the U.S. from 1990+.
Toyota -> Low Coolant Lamp ->
Vehicle: 2006 Toyota Tacoma PRE Runner 2.7 L4 GAS
This lamp will be illuminated when the coolant level in the radiator drops below a pre-determined point. To reset the lamp, bring the c...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Tacoma MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Tacoma AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Tacoma cars and light trucks sold in the U.S. from 1990+.
Toyota -> Low Oil Level Warning Indicator ->
Vehicle: 2006 Toyota Tacoma PRE Runner 2.7 L4 GAS
This lamp lights to indicate that the engine oil level is below a specified level. The lamp will be illuminated during engine start-up. If...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Tacoma MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Tacoma AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Tacoma cars and light trucks sold in the U.S. from 1990+.
Toyota -> Anti-Lock Brake System (ABS)/Vehicle Stability Control (VSC) System Warning Lamp -> 2002-09 Tacoma
Vehicle: 2006 Toyota Tacoma X-RUNNER 4.0 V6 GAS
The anti-lock warning lamp is used to warn of a system fault. The lamp will be lit during engine start-up, but should go out when the self-diagnostic system verifies proper anti-lock operation. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After system diagnosis and repair are complete, the lamp can be reset using the following procedures:
- Place ignition switch ...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Tacoma MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Tacoma AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Tacoma cars and light trucks sold in the U.S. from 1990+.
Toyota -> Automatic Transmission Oil Temperature Warning Lamp ->
Vehicle: 2006 Toyota Tacoma 4.0 V6 GAS
This lamp will be illuminated when automatic transmission or transfer case fluid temperature exceeds 302°F. If the lamp lights, allow vehicle to operate at idle speed until fluid temperature falls below 248°F; t...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Tacoma MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Toyota Tacoma AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Toyota Tacoma cars and light trucks sold in the U.S. from 1990+.
Toyota -> Air Bag Warning Lamp -> 2003-09 Tacoma
Vehicle: 2006 Toyota Tacoma 2.7 L4 GAS
- Connect two service wires to terminals Tc and CG of data link connector.
- Turn ignition switch to On position and wait for approximately 6 seconds.
- SRS warning lamps will illuminate 2-4 seconds later. Within 1-5 seconds, ground terminal Tc of DLC.
- SRS warning lamp will go off within 2-4 seconds. Within 1-5 seconds, release...
CLICK HERE TO GET FULL ACCESS TO 2006 Toyota Tacoma MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Toyota Tacoma vehicle.
|
| Access the Complete guide! |
