Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Ford F-450 Super Duty car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Ford F-450 Super Duty automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Ford F-450 Super Duty
- 2008 Ford F-450 Super Duty Lariat 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2008 Ford F-450 Super Duty XL 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2008 Ford F-450 Super Duty XLT 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2008 Ford F-450 Super Duty XLT 6.8 V10 GAS, CID:415, Fuel Injection, Aspiration:415, Engine VIN:, Desg:Y
- 2008 Ford F-450 Super Duty XL 6.8 V10 GAS, CID:415, Fuel Injection, Aspiration:415, Engine VIN:, Desg:Y
- 2008 Ford F-450 Super Duty Lariat 6.8 V10 GAS, CID:415, Fuel Injection, Aspiration:415, Engine VIN:, Desg:Y
BRAKE SERVICE PROCEDURES FOR 2008 Ford F-450 Super Duty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford F-450 Super Duty cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Bendix Hydro-Boost Brake Booster -> Bendix Hydro-Max Brake Booster -> Combination Valve -> Height Sensing Proportioning Valve -> Hydraulic Control Unit (HCU) -> Hydraulic Control Valves -> Integral Bypass Proportioning Valve -> Master Cylinder
Vehicle: 2008 Ford F-450 Super Duty XLT 6.8 V10 GAS
Master Cylinder
The master cylinder consists primarily of a hydraulic cylinder, primary and secondary hydraulic pistons and a single or dual chamber fluid reservoir. The front brakes are connected to the primary outlet port(s) and are actuated by the primary piston assembly. The rear brakes are connected to the secondary outlet port and are actuated by the secondary piston assembly.
Hydraulic Control Valves
Combination Valve
This multi-function hydraulic control unit consists primarily of a pressure differential valve, brake lamp warning switch and a proportioning valve. A pressure diff...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-450 Super Duty BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Ford F-450 Super Duty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford F-450 Super Duty cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Cleaning & Inspection -> Disassemble -> E-150, E-250, E-350 & E-450 -> E-150, E-250, E-350 & E-550 -> E-450 -> E-550 -> E-Series -> Edge & MKX -> Escape & Mariner -> Expedition & Navigator -> Expedition, F-Super Duty, Motorhome & Navigator -> Explorer & Mountaineer -> Explorer Sport/Sport Trac -> Explorer, Explorer Sport/Sport Trac, Mountaineer & Ranger -> F-150 & Mark LT -> F-Super Duty & Motorhome -> Freestar & Monterey -> Front -> Inspection -> Installation -> Overhaul -> Ranger -> Rear -> Removal -> Replacement
Vehicle: 2008 Ford F-450 Super Duty Lariat 6.8 V10 GAS
Replacement
Edge & MKX
- Syphon and discard a portion of brake fluid from master cylinder.
- Raise and support vehicle, then remove wheel and tire assembly.
- Position frame side of C-clamp on inboard side of disc brake caliper. Do not place clamp frame over front brake hose.
- Position screw side of C-clamp on outboard brake shoe and lining, then tighten C-clamp until there is enough clearance to remove caliper.
- Remove front brake hose flow bolt, then disconnect and plug front brake hose. Discard copper washers.
- Remove two caliper slide pins.
- Slide brake shoe and lining out of front disc brake...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-450 Super Duty BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Ford F-450 Super Duty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford F-450 Super Duty cars and light trucks from 1990+.
Hydraulic Brake Systems -> Power Brake Unit Service
Vehicle: 2008 Ford F-450 Super Duty Lariat 6.4 V8 DIESEL
The Hydro-Boost and Hydro-Max power brake booster...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-450 Super Duty BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Ford F-450 Super Duty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford F-450 Super Duty cars and light trucks from 1990+.
Disc Brakes -> Brake System Bleed -> Anti-Lock Brake System Hydraulic Control Unit -> Anti-Lock Brakes -> Bench -> Caliper -> E-Series, F-150 & Mark LT -> Edge, Escape, Mariner & MKX -> Expedition & Navigator -> Explorer & Mountaineer -> Explorer Sport/Sport Trac, Freestar, F-Super Duty, Monterey, Motorhome & Ranger -> Four Wheel Anti-Lock Brake System -> Gravity Bleed -> In Vehicle -> Manual -> Manual Bleed -> Master Cylinder -> Pressure -> Pressure Bleed
Vehicle: 2008 Ford F-450 Super Duty XL 6.4 V8 DIESEL
Explorer & Mountaineer
Master Cylinder
- Connect one end of a clear flexible hose to master cylinder bleeder screw. Submerge other end in a container partially filled with suitable brake fluid.
- Have an assistant pump and then hold firm pressure on brake pedal.
- Open master cylinder bleeder screw until brake fluid flows into container.
- When fluid stops flowing, close bleeder screw.
- Repeat procedure until there are no air bubbles in fluid.
- Have an assistant pump and then hold firm pressure on brake pedal.
- Loosen a master cylinder tube fitting at anti-lock brake hydraulic control unit.
- When...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-450 Super Duty BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Ford F-450 Super Duty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford F-450 Super Duty cars and light trucks from 1990+.
Disc Brakes -> Precautions
Vehicle: 2008 Ford F-450 Super Duty XLT 6.4 V8 DIESEL
Do not spill brake fluid on painted surfaces. If brake fluid is spilled on surfaces, wash off immediately.
Always inspect brake fluid level prior to servicing brake system If brake fluid level...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-450 Super Duty BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Ford F-450 Super Duty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford F-450 Super Duty cars and light trucks from 1990+.
Hydraulic Brake Systems -> Power Brake Unit Service
Vehicle: 2008 Ford F-450 Super Duty XLT 6.8 V10 GAS
The Hydro-Boost and Hydro-Max power brake booster...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-450 Super Duty BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Ford F-450 Super Duty vehicle.
|
| Access the Complete guide! |
