Auto Parts Search
We have info for following modifications of 2008 Hummer H3
- 2008 Hummer H3 X 3.7 L5 GAS, CC:3654, CID:223, Fuel Injection, Aspiration:223, Engine VIN:, Desg:E
- 2008 Hummer H3 3.7 L5 GAS, CC:3654, CID:223, Fuel Injection, Aspiration:223, Engine VIN:, Desg:E
- 2008 Hummer H3 Alpha 5.3 V8 GAS, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:L
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Hummer H3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Hummer H3 cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2008 Hummer H3 3.7 L5 GAS
- Apply the Parking brake, then place the ignition switch in the On position.
- Cycle the headlamp switch from Off to Parking Lamp position 4 times within 4 seconds.
- The horn should chirp twice and the low tire pressure warning indicator should begin to flash indicating the system is in the learn mode.
- If GM tool No. J-46079 or equivalent is available, starting with the left front tire, hold the antenna of the tool No. J-46079 near the valve stem on the wheel, then press the activate button and wait for the horn to chirp.
- If the tool is not available, starting with the left front tir...
CLICK HERE TO GET FULL ACCESS TO 2008 Hummer H3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Hummer H3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Hummer H3 cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2008 Hummer H3 X 3.7 L5 GAS
- Apply the Parking brake, then place the ignition switch in the On position.
- Cycle the headlamp switch from Off to Parking Lamp position 4 times within 4 seconds.
- The horn should chirp twice and the low tire pressure warning indicator should begin to flash indicating the system is in the learn mode.
- If GM tool No. J-46079 or equivalent is available, starting with the left front tire, hold the antenna of the tool No. J-46079 near the valve stem on the wheel, then press the activate button and wait for the horn to chirp.
- If the tool is not available, starting with the left front tir...
CLICK HERE TO GET FULL ACCESS TO 2008 Hummer H3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Hummer H3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Hummer H3 cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2008 Hummer H3 Alpha 5.3 V8 GAS
Refer to Fig. for wir...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2008 Hummer H3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Hummer H3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Hummer H3 cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2008 Hummer H3 3.7 L5 GAS
Tire Pressure Indicator Sensor
Each tire pressure sensor has an internal power supply which has a service life of 10 years.
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bead up and over ...
CLICK HERE TO GET FULL ACCESS TO 2008 Hummer H3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Hummer H3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Hummer H3 cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2008 Hummer H3 X 3.7 L5 GAS
Refer to Fig. for wir...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2008 Hummer H3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Hummer H3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Hummer H3 cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic System Check -> Diagnostic Tests -> DTC C0750 Left Front Low Tire Pressure Sensor, C0755 Right Front Low Tire Pressure Sensor, C0760 Left Rear Low Tire Pressure Sensor Or C0765 Right Rear Low Tire Pressure Sensor -> DTC C0775 Low Tire Pressure System Sensors Not Learned -> Intermittent & Poor Connections -> Intermittents -> Low Tire Pressure Indicator Fault -> Poor Connections
Vehicle: 2008 Hummer H3 X 3.7 L5 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to DLC (Data Link Connector) and follow manufacturer's instructions.
Diagnostic Tests
Low tire pressure in one or more tires is indicated by a continuously illuminated TPMS indicator after the bulb check is completed. The DIC will display a check tire pressure type message, if equipped. It is not necessary to perform the Relearn procedure for a low tire condition.
When a TPMS DTC is set, the TPMS indicator will flash for one minute after the bulb check is completed and then will remain illuminated. The DI...
CLICK HERE TO GET FULL ACCESS TO 2008 Hummer H3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Hummer H3 vehicle. |
Access the Complete guide! |