Auto Parts Search
2009 Audi R8 CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Audi REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Audi R8 AUTOMOBILES
DRIVESHAFT, Replace
Vehicle: 2009 Audi R8 4.2 V8 GAS
Front
- Place selector lever in position "N".
- On models with air suspension, activate vehicle lifting mode.
- On all models, raise and support vehicle.
- Remove screws and remove rear noise insulation.
- Remove right heat shield from front final drive.
- Continuation for all vehicles: Check whether there is a factory marking (paint mark) on front driveshaft and at driveshaft flange. If not, identify position of driveshaft constant velocity joint to driveshaft flange at front final drive with paint.
- Remove bolts at front final drive/front driveshaft connection.
- Remove bolts at transfer case/fr...
CLICK HERE TO GET FULL ACCESS TO 2009 Audi R8 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Audi R8 AUTOMOBILES
Reset Procedures
Vehicle: 2009 Audi R8 4.2 V8 GAS
- Check and the adjust tire pressure to the manufacturer's specifications.
- Press the Reset button located on the windshield wiper control lever until DISPLAY TYPE appears on the instrument cluster.
- Press button on end of the windshield wiper control lever to select SET option.
- Press the Reset button on the windshield wiper control lever.
- Press button on end of the wi...
CLICK HERE TO GET FULL ACCESS TO 2009 Audi R8 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Audi R8 AUTOMOBILES
Starter, Replace
Vehicle: 2009 Audi R8 4.2 V8 GAS
- Disconnect battery ground cable.
- Remove rear noise insulation.
- Remove electrical connector from solenoid.
- Remove terminal B+ protective cap.
- Remove nut and terminal B+ from solenoi...
CLICK HERE TO GET FULL ACCESS TO 2009 Audi R8 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2009 Audi R8 AUTOMOBILES
Cabin Air Filter Service -> Audi -> 2005-09 A6, 2007-09 S6, 2008-09 R8 & 2009 RS6
Vehicle: 2009 Audi R8 4.2 V8 GAS
The cabin air filter should be replaced at 15,000 miles, then every 20,000 miles.
- Remove the instrument panel trim from under the glove compartment, Fig. .
- From under the right side of the instrument panel, release the cabin air filter cover retainer and remove the cover, Fig.
- Remove the first cabin filter element f...
CLICK HERE TO GET FULL ACCESS TO 2009 Audi R8 CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Audi R8 AUTOMOBILES
Audi -> Air Bag Warning Lamp ->
Vehicle: 2009 Audi R8 4.2 V8 GAS
If the Air Bag warning lamp lights and stays on, diagnosis and ...
CLICK HERE TO GET FULL ACCESS TO 2009 Audi R8 MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Audi R8 AUTOMOBILES
Radiator, Replace
Vehicle: 2009 Audi R8 4.2 V8 GAS
- Open coolant reservoir cap.
- Remove front vehicle underbody cover.
- Remove front bumper cover.
- Remove luggage compartment tray.
- Remove bolts and front air duct.
- Drain coolant into a suitable container.
- Remove lower...
CLICK HERE TO GET FULL ACCESS TO 2009 Audi R8 RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2009 Audi R8 AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2009 Audi R8 4.2 V8 GAS
Before lifting the vehicle with a jack or lift, press buttons 1 and 3 of level control (located in center dash, left of hazard lights button) at the same time for at least 5 seconds with the ignition switched on.
When the system is in "jack mode," the LEDs on control buttons 1 and 3 , the yellow LED for the manual mode on the level indicator 2 and warning light for level control in the instrument cluster will all come on. Once this happens, switch off the ignition. The vehicle can now be lifted.
To deactivate the "jack mode," press buttons 1 and 3 at the same time for a...
CLICK HERE TO GET FULL ACCESS TO 2009 Audi R8 SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2009 Audi R8 AUTOMOBILES
OEM TSB listings for most 2009 Audi R8 cars and light trucks sold in the U.S. from 1985+.
Document: AIRBAG / PYROTECHNIC SAFETY BELT DEPLOYMENT INQUIRIES - REVISED Vehicle: 2009 Audi R8 4.2 V8 GAS Auto Systems: |
Document: AUDI TIRE PRESSURE MONITORING SYSTEMS OVERVIEW - REVISED Vehicle: 2009 Audi R8 4.2 V8 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2009 Audi R8 TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2009 Audi R8 AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2009 Audi R8 cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2009 Audi R8 cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2009 Audi R8 cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2009 Audi R8 cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2009 Audi R8 SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Audi R8 vehicle. |
Access the Complete guide! |