Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Cadillac STS car and truck
repair procedures including Cadillac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Cadillac STS automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Cadillac STS
- 2009 Cadillac STS 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:A
- 2009 Cadillac STS 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:V
- 2009 Cadillac STS V 4.4 V8 GAS, CC:4371, CID:267, Fuel Injection, Aspiration:267, Engine VIN:, Desg:D
- 2009 Cadillac STS Platinum 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:A
- 2009 Cadillac STS Platinum 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:V
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Cadillac STS AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Cadillac STS cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2009 Cadillac STS Platinum 4.6 V8 GAS
Tire Pressure Indicator Sensor
Each tire pressure sensor has an internal power supply which has a service life of 10 years.
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bead up and over ...
CLICK HERE TO GET FULL ACCESS TO 2009 Cadillac STS TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Cadillac STS AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Cadillac STS cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2009 Cadillac STS 3.6 V6 GAS
- Place the ignition switch in the On position.
- Using the keyless entry transmitters press the lock and unlock buttons at the same time until a horn chirp sounds indicating the learn mode has been actuated.
- Using a suitably programmed scan tool, connect the scan tool to the DLC (Data Link Connector) located under the lefthand side of the instrument panel. Initiate the TPMS Learn Mode. A double horn chirp will sound indicating the Learn Mode has been enabled.
- Starting with the left front tire, hold the antenna of GM tool J-46079, or equivalent, near the valve stem on the wheel, the...
CLICK HERE TO GET FULL ACCESS TO 2009 Cadillac STS TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Cadillac STS AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Cadillac STS cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2009 Cadillac STS Platinum 3.6 V6 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2009 Cadillac STS TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Cadillac STS AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Cadillac STS cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2009 Cadillac STS Platinum 3.6 V6 GAS
- Place the ignition switch in the On position.
- Using the keyless entry transmitters press the lock and unlock buttons at the same time until a horn chirp sounds indicating the learn mode has been actuated.
- Using a suitably programmed scan tool, connect the scan tool to the DLC (Data Link Connector) located under the lefthand side of the instrument panel. Initiate the TPMS Learn Mode. A double horn chirp will sound indicating the Learn Mode has been enabled.
- Starting with the left front tire, hold the antenna of GM tool J-46079, or equivalent, near the valve stem on the wheel, the...
CLICK HERE TO GET FULL ACCESS TO 2009 Cadillac STS TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Cadillac STS AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Cadillac STS cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2009 Cadillac STS 3.6 V6 GAS
Tire Pressure Indicator Sensor
Each tire pressure sensor has an internal power supply which has a service life of 10 years.
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bead up and over ...
CLICK HERE TO GET FULL ACCESS TO 2009 Cadillac STS TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Cadillac STS AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Cadillac STS cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2009 Cadillac STS Platinum 4.6 V8 GAS
- Place the ignition switch in the On position.
- Using the keyless entry transmitters press the lock and unlock buttons at the same time until a horn chirp sounds indicating the learn mode has been actuated.
- Using a suitably programmed scan tool, connect the scan tool to the DLC (Data Link Connector) located under the lefthand side of the instrument panel. Initiate the TPMS Learn Mode. A double horn chirp will sound indicating the Learn Mode has been enabled.
- Starting with the left front tire, hold the antenna of GM tool J-46079, or equivalent, near the valve stem on the wheel, the...
CLICK HERE TO GET FULL ACCESS TO 2009 Cadillac STS TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
