Auto Parts Search

We have info for following modifications of 2009 Hyundai Elantra
- 2009 Hyundai Elantra GLS 2.0 L4 GAS, CC:1975, Fuel Injection, Engine VIN:, Desg:D
- 2009 Hyundai Elantra SE 2.0 L4 GAS, CC:1975, Fuel Injection, Engine VIN:, Desg:D
- 2009 Hyundai Elantra Touring 2.0 L4 GAS, CC:1975, Fuel Injection, Engine VIN:, Desg:E
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Hyundai Elantra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Hyundai Elantra cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Traction Control System (TCS) Warning Lamp ->
Vehicle: 2009 Hyundai Elantra SE 2.0 L4 GAS
The TCS warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The lamp will also illuminate when the TCS switch...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Elantra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Hyundai Elantra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Hyundai Elantra cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Electronic Brake Force Distribution (EBD)/Parking Brake Warning Lamp ->
Vehicle: 2009 Hyundai Elantra GLS 2.0 L4 GAS
The EBD/Parking Brake warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The lamp will also illuminate when the parking brake is in the applied position. If the lamp EBD/Pa...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Elantra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Hyundai Elantra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Hyundai Elantra cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2008-09 Elantra -> Relearn -> Reset -> Tire Pressure Sensor Initiation -> TPMS Receiver
Vehicle: 2009 Hyundai Elantra GLS 2.0 L4 GAS
Reset
The low tire pressure warning lamp will illuminate briefly as a bulb check when the ignition switch is placed in the On position. This system uses radio frequency pressure sensors which monitor pressure in all 4 tires. If low tire pressure is detected, the low tire pressure warning lamp will illuminate. Adjusting tire to recommended pressure will turn lamp off.
Relearn
Tire Pressure Sensor Initiation
- Using Hyundai TPMS exciter tool, or equivalent, read the four tire pressure sensor IDs starting with sensor 1 the LH front wheel.
- Read the remaining sensors in the following order:
- ...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Elantra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Hyundai Elantra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Hyundai Elantra cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Electronic Stability Control (ESC) Warning Lamp ->
Vehicle: 2009 Hyundai Elantra SE 2.0 L4 GAS
The ESC warning lamp is used to warn of a system fault. It will be lit when the ignition switch is placed in the on position, but should go out when the self-diagnostic system determines that the system is functioning properly. The lamp will flash when the ...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Elantra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Hyundai Elantra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Hyundai Elantra cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Electronic Brake Force Distribution (EBD)/Parking Brake Warning Lamp ->
Vehicle: 2009 Hyundai Elantra Touring 2.0 L4 GAS
The EBD/Parking Brake warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The lamp will also illuminate when the parking brake is in the applied position. If the lamp EBD/Pa...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Elantra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Hyundai Elantra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Hyundai Elantra cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Anti-Lock Brake Warning Lamp ->
Vehicle: 2009 Hyundai Elantra SE 2.0 L4 GAS
The Anti-Lock warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. If the ...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Elantra MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |