Auto Parts Search

MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Mercury Grand Marquis AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Mercury Grand Marquis cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Service Interval Reminder -> 2006-09 Grand Marquis -> Reset
Vehicle: 2009 Mercury Grand Marquis LS 4.6 V8 FLEX
Reset
- Press and hold RESET control for two seconds and release. Oil life is set to 100% and "OIL LIFE XXX% HOLD RESET IF NEW OIL"...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Grand Marquis MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Mercury Grand Marquis AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Mercury Grand Marquis cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Air Bag Warning Lamp ->
Vehicle: 2009 Mercury Grand Marquis LS 4.6 V8 FLEX
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the Air B...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Grand Marquis MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Mercury Grand Marquis AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Mercury Grand Marquis cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Check Engine Lamp/Malfunction Indicator Lamp (MIL)/Service Engine Soon Lamp -> 2007-09 Models -> Keep Alive Memory (KAM) Reset & PCM Reset Less Electronic Tester -> PCM Reset Using Generic Scan Tool
Vehicle: 2009 Mercury Grand Marquis LS 4.6 V8 FLEX
This lamp should light when the ignition is turned On. After engine starts, the lamp should go off, unless a fault condition is detected by the EEC-V system. If the lamp remains On or starts to blink, a diagnostic trouble code is stored in the PCM. Following diagnosis and repair, the Check Engine/MIL lamp will automatically reset when stored diagnostic trouble codes are cleared from PCM memory. The PCM reset procedure allows the scan tool to command the PCM to clear all diagnostic trouble codes.
The lamp illuminates when the ignition is first turned to the on position to check the...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Grand Marquis MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Mercury Grand Marquis AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Mercury Grand Marquis cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Low Oil Level Warning Indicator ->
Vehicle: 2009 Mercury Grand Marquis LS 4.6 V8 FLEX
This system is used to indicate when the engine oil level is 11/2 quarts or more below the specified level. The lamp should light during engine starting. If the oil level is sufficient, the lamp will go off when the engine is operating. If the ...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Grand Marquis MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Mercury Grand Marquis AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Mercury Grand Marquis cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Low Coolant Lamp ->
Vehicle: 2009 Mercury Grand Marquis LS 4.6 V8 FLEX
The low coolant warning lamp should light whenever the coolant level in the coolant recovery bottle is 1/4 to 3/4 inch or more below the cold full mark. Raise coolant level in recovery bottle to the cold full mark to turn lamp off.
On models equipped with GEM module and low coolant level warning system, t...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Grand Marquis MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Mercury Grand Marquis AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Mercury Grand Marquis cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2008-09 Grand Marquis -> Relearn -> Reset -> TPMS Sensor Activation -> TPMS Sensor Training
Vehicle: 2009 Mercury Grand Marquis LS 4.6 V8 FLEX
Reset
If the system detects low tire pressure, CHECK TIRE PRESSURE lamp will illuminate. Inflating tire(s) to recommended pressure will clear the tire message. Up to two minutes of driving above 20 mph may be required for the warning lamp to turn OFF after the tires have been filled to the recommended pressure.
Relearn
TPMS Sensor Activation
To conserve battery power, the TPMS sensors will go into a sleep mode after approximately 30 minutes of inactivity. The sensors will not transmit tire pressure information while in sleep mode. The sensors must be activated to transmit the ...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Grand Marquis MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |