Auto Parts Search

We have info for following modifications of 2009 Nissan Xterra
- 2009 Nissan Xterra OFF-ROAD 4.0 V6 GAS, CC:3954, Fuel Injection
- 2009 Nissan Xterra S 4.0 V6 GAS, CC:3954, Fuel Injection
- 2009 Nissan Xterra SE 4.0 V6 GAS, CC:3954, Fuel Injection
- 2009 Nissan Xterra X 4.0 V6 GAS, CC:3954, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Nissan Xterra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Nissan Xterra cars and light trucks sold in the U.S. from 1990+.
Nissan -> Anti-Lock Warning Lamp -> 2003-09 Xterra
Vehicle: 2009 Nissan Xterra S 4.0 V6 GAS
This lamp will be illuminated when the ignition switch is placed in the on position as a bulb check. If the lamp remains lit or lights during vehicle operation, a problem in the anti-lock brake/traction control system is indicated. When t...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Xterra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Nissan Xterra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Nissan Xterra cars and light trucks sold in the U.S. from 1990+.
Nissan -> All Wheel Drive (AWD) Warning Lamp ->
Vehicle: 2009 Nissan Xterra OFF-ROAD 4.0 V6 GAS
When the ignition switch is placed in the on position, the AWD warning lamp will light as a bulb check but should go off soon after the engine is started. If a malfunction in the AWD system exist or if fr...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Xterra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Nissan Xterra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Nissan Xterra cars and light trucks sold in the U.S. from 1990+.
Nissan -> Malfunction Indicator Lamp (MIL) -> 2007-09
Vehicle: 2009 Nissan Xterra S 4.0 V6 GAS
The MIL will illuminate to indicate that a system fault has been detected. The MIL will blink simultaneously with the red Light Emitting Diode (LED) on the Electronic Control Module (ECM). Following diagnosis and repair of all system faults, reset the MIL lamp. The DTCs can be cleared by placing the ignition switch in the off position. After approximately 10 seconds, place ignition switch in the on position engine not running. Depress the accelerator pedal to change from Mode II to Mode I. Place ignition switch in off position....
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Xterra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Nissan Xterra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Nissan Xterra cars and light trucks sold in the U.S. from 1990+.
Nissan -> Check Suspension Warning Lamp ->
Vehicle: 2009 Nissan Xterra S 4.0 V6 GAS
This lamp may indicate a malfunction in the auto-leveling suspension. After diagnosis and rep...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Xterra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Nissan Xterra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Nissan Xterra cars and light trucks sold in the U.S. from 1990+.
Nissan -> All Wheel Drive (AWD) Warning Lamp ->
Vehicle: 2009 Nissan Xterra X 4.0 V6 GAS
When the ignition switch is placed in the on position, the AWD warning lamp will light as a bulb check but should go off soon after the engine is started. If a malfunction in the AWD system exist or if fr...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Xterra MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Nissan Xterra AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Nissan Xterra cars and light trucks sold in the U.S. from 1990+.
Nissan -> Traction Control/Slip Indicator Lamp ->
Vehicle: 2009 Nissan Xterra S 4.0 V6 GAS
Drive wheel slippage is detected by the four wheel rotating signal. When wheel slip becomes excessive, the Traction Control System (TCS) operates causing the SLIP indicator lamp to illuminate. When the TCS off switch is used to cancel TCS function, the ...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Xterra MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |