Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Volkswagen GTI car and truck
repair procedures including Volkswagen engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Volkswagen GTI automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Volkswagen GTI
- 2009 Volkswagen GTI 2.0 L4 GAS, CC:1984, CID:121, Fuel Injection, Aspiration:121
- 2009 Volkswagen GTI 2.0 L4 GAS, CC:1984, CID:121, Fuel Injection, Aspiration:121
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Volkswagen GTI AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Volkswagen GTI cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Volkswagen GTI 2.0 L4 GAS
Wheel bearing must not be burdened while 12 point nut is loose.
If wheel bearing is burdened by weight of vehicle, wheel bearing will be pre-damaged. This will diminish wheel bearing service life.
If it should be necessary to move a vehicle whose drive axle has been removed, before doing so install an outer joint in place of drive axle and tighten it to 11 ft. lbs., or else wheel bearing will be damaged.
The wheel hub/axle shaft on model "Golf GTI 132 kW" and R32 is secured with a hex bolt instead of a 12-point nut. The spline of outer joint is slightly shorter than previous...
CLICK HERE TO GET FULL ACCESS TO 2009 Volkswagen GTI DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Volkswagen GTI AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Volkswagen GTI cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Volkswagen GTI 2.0 L4 GAS
Wheel bearing must not be burdened while 12 point nut is loose.
If wheel bearing is burdened by weight of vehicle, wheel bearing will be pre-damaged. This will diminish wheel bearing service life.
If it should be necessary to move a vehicle whose drive axle has been removed, before doing so install an outer joint in place of drive axle and tighten it to 11 ft. lbs., or else wheel bearing will be damaged.
The wheel hub/axle shaft on model "Golf GTI 132 kW" and R32 is secured with a hex bolt instead of a 12-point nut. The spline of outer joint is slightly shorter than previous...
CLICK HERE TO GET FULL ACCESS TO 2009 Volkswagen GTI DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2009 Volkswagen GTI vehicle.
|
| Access the Complete guide! |
