Hummer H3T REPAIR MANUAL -- HOW TO FIX YOUR CAR OR TRUCK

Auto Parts Search


Hummer H3T CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Hummer REPAIR SHOPS DON'T WANT YOU TO KNOW

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!

Help me findSearch

Select Year

2009

Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about Hummer H3T car and truck repair procedures including Hummer engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your Hummer H3T automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >
Using the Automotix DIY repair procedures will save you hundreds and even thousands of dollars! In addition, it will save you hours of touring the city searching for Hummer mechanics you can trust. The Automotix DIY solution is particularly affordable. A full access to the entire DIY repair procedures and diagrams for your Hummer H3T vehicle will cost less than a single gallon of gas. Here are some of the DIY repair tips and procedures you will find here:

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR Hummer H3T AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported Hummer H3T cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 2009 Hummer H3T Alpha 5.3 V8 GAS

Front

  • Raise and support vehicle.
  • Mark the front U-joint to the pinion yoke on the front differential.
  • Mark the relationship of the rear U-joint to the transfer case drive flange.
  • Remove the retaining nuts and bolts from the drive flange.
  • Remove the clamps and retaining bolts from the front drive axle pinion flange.
  • Remove the front propeller shaft from the vehicle.
  • Using tape and or a rubber band, wrap the front U-joint bearing caps to ensure the caps do not separate from the U-joint.
  • Reverse procedure to install, noting the following:
    • Torque front propeller shaft to the pinion flang...

CLICK HERE TO GET FULL ACCESS TO Hummer H3T DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR Hummer H3T AUTOMOBILES

Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported Hummer H3T cars and light trucks sold in the U.S. from mid 1990's+.

Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2009 Hummer H3T Alpha 5.3 V8 GAS

Tire Pressure Indicator Sensor

Each tire pressure sensor has an internal power supply which has a service life of 10 years.

Removal
  • Loosen the lug nuts.
  • Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
  • Prior to dismounting the tire from the wheel, note the following precautions:
    • Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
    • Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bead up and over ...

CLICK HERE TO GET FULL ACCESS TO Hummer H3T TIRE PRESSURE MONITORING SYSTEM PROCEDURES

STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR Hummer H3T AUTOMOBILES

Includes starter and alternator replacement procedures for domestic and imported Hummer H3T cars and light trucks from 1990+.

Alternator, Replace
Vehicle: 2009 Hummer H3T 3.7 L5 GAS

  • Disconnect battery ground cable from battery.
  • Remove accessory drive belt.
  • Raise and support vehicle only high enough to access A/C compressor through wheelhouse.
  • Remove left front wheel.
  • Remove left wheelhouse liner.
  • Disengage A/C compressor electrical connector from bracket.
  • Recover A/C system.
  • Disconnect A/C condenser and evaporator lines from compressor.
  • Remove A/C compressor mounting bolts ONLY. Upper mounting bolt will remain with A/C compress...

CLICK HERE TO GET FULL ACCESS TO Hummer H3T STARTER & ALTERNATOR REPLACEMENT PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR Hummer H3T AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported Hummer H3T cars and light trucks sold in the U.S. from 1990+.

General Motors Corp./Saturn Trucks -> Service Four Wheel Drive (4WD) System Warning Lamp ->
Vehicle: 2009 Hummer H3T 3.7 L5 GAS

This lamp should light for approximately 6-8 seconds when the ignition is turned On as a bulb check. If the ...

CLICK HERE TO GET FULL ACCESS TO Hummer H3T MAINTENANCE LAMP RESET PROCEDURES

RADIATOR & HOSE REPLACEMENT PROCEDURES FOR Hummer H3T AUTOMOBILES

Includes radiator, cooling and heater hose replacement procedures for domestic and imported Hummer H3T cars and light trucks from 1990+

Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2009 Hummer H3T 3.7 L5 GAS

Inlet

  • Drain cooling system into a suitable container.
  • Reposition hose clamp at heater core and remove hose.
  • Reposition hose clamp at heater inlet pipe and remove hose.
  • Remove hose from vehicle.
  • Reverse procedure t...

CLICK HERE TO GET FULL ACCESS TO Hummer H3T RADIATOR & HOSE REPLACEMENT PROCEDURES

SERPENTINE BELT SERVICE PROCEDURES FOR Hummer H3T AUTOMOBILES

Serpentine belt replacement procedures with corresponding images for most domestic and imported Hummer H3T cars and light trucks sold in the U.S. from 1990+.

Serpentine Drive Belt, Replace
Vehicle: 2009 Hummer H3T Alpha 5.3 V8 GAS

  • Rotate tensioner clockwise with a suitable 3/8 inch breaker bar.
  • Remove belt from water pump pul...

CLICK HERE TO GET FULL ACCESS TO Hummer H3T SERPENTINE BELT SERVICE PROCEDURES

TECHNICAL SERVICE BULLETINS FOR Hummer H3T AUTOMOBILES

OEM TSB listings for most Hummer H3T cars and light trucks sold in the U.S. from 1985+.

Document: EI09262 -- Engineering Information -- Transmission Fluid Leak From Oil Pump Area, Torque Converter Seal Blown Out
Vehicle: 2009 Hummer H3T 3.7 L5 GAS

Auto Systems:
  • Automatic Trans, Coolers, Torque Converter
  • Document: SECURITY LIGHT REMAINS ILLUMINATED AFTER VEHICLE HAS STARTED / NO STORED DTCS
    Vehicle: 2009 Hummer H3T 3.7 L5 GAS

    Auto Systems:
  • Electronic Devices, Computers, PROMS, Sensors
  • CLICK HERE TO GET FULL ACCESS TO Hummer H3T TECHNICAL SERVICE BULLETINS!

    COMPONENT/PARTS SPECIFICATIONS FOR Hummer H3T AUTOMOBILES

    BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most Hummer H3T cars and light trucks sold in the U.S. and Canada from 1970+.

    • Brake caliper mounting bolt torque
    • Brake drum runout, machining, & discard specs
    • Minimum brake lining thickness.
    • Brake rotor runout, parallelism, machining, discard, & finish specs

    A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most Hummer H3T cars and light trucks sold in the U.S. and Canada from 1980+.

    • Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap

    COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.

    PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules

    QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most Hummer H3T cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.

    • Automatic transmission/transaxles capacities, lubricant recommendations
    • Differential/final drive capacities, lube recommendations, grades, & viscosities
    • Final drive fill & drain plug torques
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
    • Severe service maintenance & interval recommendations
    • Tire sizes, wheel nut/bolt torque, pressures & rim sizes
    • Transfer case capacities, lube recommendations, grades, & viscosities

    TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most Hummer H3T cars and light trucks sold in the U.S. and Canada from 1980+

    • Airflow sensor electrical specifications
    • Tensioning specifications for systems with automatic tensioners
    • Barometric pressure sensor specs
    • Battery group number and cranking performance
    • Crankshaft & camshaft position sensor resistance
    • Engine compression pressures
    • Coolant temperature sensor specs
    • Computer advance.
    • Diesel fuel temperature sensor resistance.
    • Distributor advance specifications
    • Ignition pickup coil resistance
    • Exhaust gas recirculation temperature sensor resistance
    • Engine fastener torque values
    • Firing order diagrams
    • Fuel system pressures
    • Generator (alternator) specs
    • Intake air temperature sensor specs
    • Ignition coil specifications
    • Fuel injector resistance
    • Engine idle speeds
    • Knock sensor resistance
    • Manifold absolute pressure sensor specs
    • Mixture control solenoid resistance
    • Voltage regulator specs
    • Spark plug applications & gaps
    • Starter motor electrical specs.
    • Tensioning specifications for systems without automatic tensioners
    • Throttle body temperature sensor resistance
    • Ignition timing in degrees at rpm
    • Transmission oil temperature sensor resistance
    • Throttle position sensor specs
    • Vacuum sensor valve specs

    CLICK HERE TO GET FULL ACCESS TO Hummer H3T SPECIFICATIONS DATA!

    Shop online for auto body parts, engines, wheels, lights...

    More parts
    Help me findSearch
    Auto Repair Quick Search
    Help me find
    Search DIY repair manuals by VIN...
    Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

    Find out what info we have for your vehicle

    Get the Complete Technical Service Bulletins!
    Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your Hummer H3T vehicle.
    Access the Complete guide!
    Need To Fix Your Car or Truck?
    Save Money With Free Car Insurance Quote
    FREE car insurance quote
    Enter Zip Code:
    Auto Repair Quick Search
    Help me find