Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1990 Audi V8 Quattro car and truck
repair procedures including Audi engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1990 Audi V8 Quattro automobile. Try the Automotix DIY solution today!
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Audi V8 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Audi V8 Quattro cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1990 Audi V8 Quattro 32V 3.6 V8 GAS
Propeller shaft work must be performed with vehicle on a suitable dual support hoist.
- Remove crossmember, then catalytic converter(s) and main muffler from retainer.
- Remove transmission heat shield and heat shield above propeller shaft.
- Loosen propeller shaft bolts at transmission, differential and center support.
- Install a suitable alignment tool on driveshaft and tighten plastic nuts.
- Ensure white dot on rear propeller shaft flange aligned with a black dot on differential flange. If not, scribe mark on propeller shaft and differential flanges prior to disassembly.
- Remove propell...
CLICK HERE TO GET FULL ACCESS TO 1990 Audi V8 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Audi V8 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Audi V8 Quattro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Audi V8 Quattro 32V 3.6 V8 GAS
Refer to Fig. , during removal procedures.
- Remove cover from wheel rim using a suitable removal tool then axle shaft bolt and washer.
- Raise and support vehicle, then pull back speed sensor slightly.
- Remove both stabilizer bar bearing bushing shells, then clamping bolt for wheel bea...
CLICK HERE TO GET FULL ACCESS TO 1990 Audi V8 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1990 Audi V8 Quattro vehicle.
|
| Access the Complete guide! |
