Auto Parts Search
1990 Ford F-450 Super Duty Pickup CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Ford REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- Brake Service
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Starter & Alternator Replacement
- Radiator & Hose Replacement
- Serpentine Belt Service
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1990 Ford F-450 Super Duty Pickup car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your Ford F-450 Super Duty Pickup automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1990 Ford F-450 Super Duty Pickup AUTOMOBILES
DRUM BRAKES, FORD -> E & F 250-350 & F-Super Duty -> BRAKE SERVICE -> INSTALLATION -> REMOVAL
Vehicle: 1990 Ford F-450 Super Duty Pickup 7.3 V8 DIESEL
REMOVAL
- Raise and support vehicle.
- Remove hub cap, then wheel and tire assembly.
- On vehicles with full-floating axles, remove brake drums as follows:
- Loosen brake shoe adjustment screw.
- Remove rear axle retaining bolts and lock washers, axle shaft, and gasket.
- Remove wheel bearing locknut, lock washer, and adjusting nut.
- Remove hub and drum from axle.
- Remove brake drum-to-hub retaining screws, bolts, or bolts and nuts, then remove brake drum from hub.
- On vehicles with semi-floating axles, remove brake drums as follows:
- Remove brake drum retaining nuts.
- Remove brake drum. If brake lining is d...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford F-450 Super Duty Pickup BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR 1990 Ford F-450 Super Duty Pickup AUTOMOBILES
Ford Motor Co. Light Trucks, SUVs & Vans -> Fuel Filter Replacement -> 1985-94 Diesel 6.9L & 7.3L Engines
Vehicle: 1990 Ford F-450 Super Duty Pickup 7.3 V8 DIESEL
The fuel system remains under high pressure even when the engine is not running. This residual pressure must be relieved before servicing the fuel system. To avoid injury or fire, release pressure from the fuel system before disconnecting any fuel line.
The fuel system pressure must be relieved prior to disconnecting fuel lines to prevent accidental spray of fuel.
After the battery has been disconnected and reconnected, some abnormal driveability symptoms may occur. The vehicle may need to be driven 10 miles or more while it relearns its adaptive strategy.
- Discon...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford F-450 Super Duty Pickup FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Ford F-450 Super Duty Pickup AUTOMOBILES
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 1990 Ford F-450 Super Duty Pickup 7.3 V8 DIESEL
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 30 ft. lbs.
- Torque U-joint retainer bolts to 16 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford F-450 Super Duty Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Ford F-450 Super Duty Pickup AUTOMOBILES
Starter, Replace
Vehicle: 1990 Ford F-450 Super Duty Pickup 7.3 V8 DIESEL
- Disconnect battery ground cable.
- Raise and support vehicle, if required.
- Disconnect electrical connector or solenoid relay wire from starter motor.
- Remove starter motor attach...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford F-450 Super Duty Pickup STARTER & ALTERNATOR REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1990 Ford F-450 Super Duty Pickup AUTOMOBILES
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 1990 Ford F-450 Super Duty Pickup 7.5 V8 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition hose clamp at heater core and remove hose.
- Reposition hose clamp at coolant tube and remove hose.
- Remove hose from vehicle.
- Reverse procedure t...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford F-450 Super Duty Pickup RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1990 Ford F-450 Super Duty Pickup AUTOMOBILES
Serpentine Drive Belt, Replace -> Automatic Tension -> Manual Tension
Vehicle: 1990 Ford F-450 Super Duty Pickup 7.5 V8 GAS
Automatic Tension
- Install suitable 5/16 inch closed end wrench on tensioner pulley bolt, then lift tensioner arm away from belt. Do not use socket and ratchet.
- Remove belt, slowly release tensioner. Do not allow tensioner to snap back, as damage may result.
- Reverse procedure to install.
Manual Tension
- Loosen accessory adjustment bolt and pivot bolt.
- Remove belt.
- Reverse procedure to install, adjust belt tension as follows:
- Lo...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford F-450 Super Duty Pickup SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 1990 Ford F-450 Super Duty Pickup AUTOMOBILES
Component location diagrams for most 1990 Ford F-450 Super Duty Pickup cars and light trucks sold in the U.S. from 1990+.
 LH Side Of Engine Diagram for 1990 Ford F-450 Super Duty Pickup 7.5 V8 GASComponents on diagram: |
 4OD Transmission Components Diagram for 1990 Ford F-450 Super Duty Pickup 7.5 V8 GASComponents on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1990 Ford F-450 Super Duty Pickup PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 1990 Ford F-450 Super Duty Pickup AUTOMOBILES
OEM drawn wiring diagrams for most 1990 Ford F-450 Super Duty Pickup cars and light trucks sold in the U.S.
 1990 Ford F-450 Super Duty Pickup 7.3 V8 DIESEL Wiring DiagramComponents on diagram: |
 1990 Ford F-450 Super Duty Pickup 7.5 V8 GAS Wiring DiagramComponents on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1990 Ford F-450 Super Duty Pickup WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 1990 Ford F-450 Super Duty Pickup AUTOMOBILES
OEM TSB listings for most 1990 Ford F-450 Super Duty Pickup cars and light trucks sold in the U.S. from 1985+.
|
Document: MERCON ATF IS BRING REPLACED BY MERCON V ATF AS A SERVICE FLUID Vehicle: 1990 Ford F-450 Super Duty Pickup 7.3 V8 DIESEL Auto Systems: |
|
Document: TRANSMISSION - 4R100/E40D - TORQUE CONVERTER ACCESS EXTERNAL DUST PLUG MAY BECOME DISLODGED Vehicle: 1990 Ford F-450 Super Duty Pickup 7.3 V8 DIESEL Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 1990 Ford F-450 Super Duty Pickup TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 1990 Ford F-450 Super Duty Pickup AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1990 Ford F-450 Super Duty Pickup cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1990 Ford F-450 Super Duty Pickup cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1990 Ford F-450 Super Duty Pickup cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1990 Ford F-450 Super Duty Pickup cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 1990 Ford F-450 Super Duty Pickup SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1990 Ford F-450 Super Duty Pickup vehicle.
|
| Access the Complete guide! |
