Auto Parts Search
We have info for following modifications of 1990 GEO Storm
- 1990 GEO Storm 2+2 1.6 L4 GAS, CC:1588, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:6
- 1990 GEO Storm GSI 1.6 L4 GAS, CC:1588, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:5
- 1990 GEO Storm 1.6 L4 GAS, CC:1588, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:6
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 GEO Storm AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 GEO Storm cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 GEO Storm 1.6 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Drain transaxle fluid.
- Remove wheel assembly.
- Unstake hub nut, then remove nut.
- Remove tie rod end from steering knuckle.
- Disconnect lower control arm from steering knuckle.
- Remove drive axle from hub assembly, using a plastic hammer.
- Remove drive axle assembly from transaxle, using slide hammer (Tool No....
CLICK HERE TO GET FULL ACCESS TO 1990 GEO Storm DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 GEO Storm AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 GEO Storm cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 GEO Storm GSI 1.6 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Drain transaxle fluid.
- Remove wheel assembly.
- Unstake hub nut, then remove nut.
- Remove tie rod end from steering knuckle.
- Disconnect lower control arm from steering knuckle.
- Remove drive axle from hub assembly, using a plastic hammer.
- Remove drive axle assembly from transaxle, using slide hammer (Tool No....
CLICK HERE TO GET FULL ACCESS TO 1990 GEO Storm DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 GEO Storm AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 GEO Storm cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 GEO Storm 2+2 1.6 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Drain transaxle fluid.
- Remove wheel assembly.
- Unstake hub nut, then remove nut.
- Remove tie rod end from steering knuckle.
- Disconnect lower control arm from steering knuckle.
- Remove drive axle from hub assembly, using a plastic hammer.
- Remove drive axle assembly from transaxle, using slide hammer (Tool No....
CLICK HERE TO GET FULL ACCESS TO 1990 GEO Storm DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1990 GEO Storm vehicle. |
Access the Complete guide! |