Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1990 Isuzu Pickup car and truck
repair procedures including Isuzu engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1990 Isuzu Pickup automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1990 Isuzu Pickup
- 1990 Isuzu Pickup 2.3 L4 GAS, CC:2254, Carburetor, Engine VIN:, Desg:L
- 1990 Isuzu Pickup 2.6 L4 GAS, CC:2559, Fuel Injection, Engine VIN:, Desg:E
- 1990 Isuzu Pickup 1 TON 2.6 L4 GAS, CC:2559, Fuel Injection, Engine VIN:, Desg:E
- 1990 Isuzu Pickup Normal CAB 2.3 L4 GAS, CC:2254, Carburetor, Engine VIN:, Desg:L
- 1990 Isuzu Pickup Normal CAB 2.6 L4 GAS, CC:2559, Fuel Injection, Engine VIN:, Desg:E
BRAKE SERVICE PROCEDURES FOR 1990 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Isuzu Pickup cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEM -> HYDRAULIC BRAKE SPECIFICATIONS
Vehicle: 1990 Isuzu Pickup 2.6 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 1990 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Isuzu Pickup cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEM -> DESCRIPTION -> COMBINATION VALVE -> DIAGONAL SPLIT MASTER CYLINDER -> DUAL MASTER CYLINDER -> FLUID LEVEL SENSOR SWITCH -> PROPORTION VALVES
Vehicle: 1990 Isuzu Pickup 2.3 L4 GAS
DUAL MASTER CYLINDER
The master cylinder contains two pistons that supply hydraulic pressure for a dual-circuit brake system. The primary piston provides the fluid pressure to the front brakes, while the secondary piston provides the fluid pressure to the rear brakes. If the pressure is lost from either system, the remaining system will function to stop the vehicle.
DIAGONAL SPLIT MASTER CYLINDER
The diagonal split master cylinder incorporates the functions of the standard dual master cylinder plus a fluid level sensor and proportioning valves. In a diagonal split system, the left rear...
CLICK HERE TO GET FULL ACCESS TO 1990 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Isuzu Pickup cars and light trucks from 1990+.
POWER BRAKE UNITS -> DESCRIPTION -> SINGLE VACUUM UNIT -> TANDEM VACUUM UNIT
Vehicle: 1990 Isuzu Pickup 2.6 L4 GAS
SINGLE VACUUM UNIT
In a normal operating mode, with the service brakes in the released position, the single vacuum booster operates with vacuum on one side of the diaphragm. When the brakes are applied, air at atmospheric pressure is admitted to one side of the diaphragm to provide the power assist. When the service brake is released, the atmospheric pressure is cut off from the one side of t...
CLICK HERE TO GET FULL ACCESS TO 1990 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Isuzu Pickup cars and light trucks from 1990+.
ANTI-LOCK BRAKES -> COMPONENT REPLACEMENT -> Amigo, Pickup & Rodeo -> Amigo, Pickup, Rodeo & Trooper w/Rear Wheel ABS -> ELECTRONIC BRAKE CONTROL MODULE (EBCM) -> ELECTRONIC CONTROL MODULE (ECM) -> FRONT SPEED SENSOR -> G-SENSOR -> HYDRAULIC UNIT -> Impulse -> Impulse & Trooper w/Four Wheel ABS -> ISOLATION/DUMP VALVE -> REAR SPEED SENSOR -> SPEED SENSOR -> Trooper w/Four Wheel ABS -> Trooper w/Rear Wheel ABS
Vehicle: 1990 Isuzu Pickup Normal CAB 2.3 L4 GAS
These components are non-serviceable and must be replaced as a unit, do not try to disassemble components.
HYDRAULIC UNIT
Impulse
- Remove undercover, then inner liner, Fig.
- Disconnect harness connectors.
- Remove radiator reservoir tank.
- Disconnect brake lines from hydraulic unit, then cap lines to prevent entry of foreign material into brake system.
- Remove ground strap retaining bolt, then ground cable.
- Remove bracket fixing bolt, then hydraulic unit fixing nuts.
- Remove hydraulic unit from vehicle.
- Reverse procedure to install, noting the following:
- Torque hydraulic unit fixing nuts, ...
CLICK HERE TO GET FULL ACCESS TO 1990 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Isuzu Pickup cars and light trucks from 1990+.
DISC BRAKES -> CALIPER SERVICE -> AMIGO, PICKUP, RODEO & TROOPER -> AMIGO, PICKUP, RODEO & TROOPER II -> FRONT -> IMPULSE & STYLUS -> Installation -> Overhaul -> REAR -> Removal -> Replace
Vehicle: 1990 Isuzu Pickup Normal CAB 2.3 L4 GAS
Replace
FRONT
IMPULSE & STYLUS
- Raise and support vehicle and remove front wheels.
- Disconnect flexible brake hose at caliper and cap hose openings.
- Remove upper and lower caliper mounting bolts, then remove caliper from disc.
- Reverse procedure to install, tighten caliper attaching bolts to specification.
AMIGO, PICKUP, RODEO & TROOPER II
Removal
- Perform steps one through three as outlined under "Brake Pad, Replace" procedure.
- Disconnect brake hose from caliper and cap openings in hose and caliper.
- Remove caliper from vehicle.
Installation
- Perform steps one through three as outlined under "Brak... "
CLICK HERE TO GET FULL ACCESS TO 1990 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Isuzu Pickup cars and light trucks from 1990+.
POWER BRAKE UNITS -> ADJUSTMENTS -> BRAKE BOOSTER PUSHROD -> RODEO -> TROOPER
Vehicle: 1990 Isuzu Pickup Normal CAB 2.3 L4 GAS
BRAKE BOOSTER PUSHROD
RODEO
Adjust pushrod length as described under "Power Brake Unit, Replace."
TROOPER
- Remove retainer from vacuum booster front shell, using a tapering screwdriver.
- Gently draw plate and seal assembly out of the shell inside, Fig.
- Set pushrod gauge on vacuum booster. Us...
CLICK HERE TO GET FULL ACCESS TO 1990 Isuzu Pickup BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
