Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1990 Peugeot 405 car and truck
repair procedures including Peugeot engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1990 Peugeot 405 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1990 Peugeot 405
- 1990 Peugeot 405 DL 1.9 L4 GAS, CC:1905, Fuel Injection, Engine VIN:, Desg:A
- 1990 Peugeot 405 DL 1.9 L4 GAS, CC:1905, Fuel Injection, Engine VIN:, Desg:C
- 1990 Peugeot 405 MI16 1.9 L4 GAS, CC:1905, Fuel Injection, Engine VIN:, Desg:B
- 1990 Peugeot 405 S 1.9 L4 GAS, CC:1905, Fuel Injection, Engine VIN:, Desg:A
- 1990 Peugeot 405 S 1.9 L4 GAS, CC:1905, Fuel Injection, Engine VIN:, Desg:C
- 1990 Peugeot 405 MI16 1.9 L4 GAS, CC:1905, Fuel Injection, Engine VIN:, Desg:D
BRAKE SERVICE PROCEDURES FOR 1990 Peugeot 405 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Peugeot 405 cars and light trucks from 1990+.
PEUGEOT, DISC BRAKES -> REAR BRAKE PADS REPLACEMENT -> 405 -> 505
Vehicle: 1990 Peugeot 405 DL 1.9 L4 GAS
405
- Raise and support rear of vehicle, then remove wheel assembly.
- Drain a small amount of brake fluid from master cylinder reservoir.
- Disconnect parking brake cable from lever.
- Remove bolt (2) while holding guide (3), Fig. , then pivot caliper down and remove pads.
- Clean all components and ensure caliper slides freely.
- Compress caliper piston using compressing tool No. 0805-JZ or equivalent. Position piston slots...
CLICK HERE TO GET FULL ACCESS TO 1990 Peugeot 405 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Peugeot 405 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Peugeot 405 cars and light trucks from 1990+.
PEUGEOT, DISC BRAKES -> FRONT BRAKE PADS REPLACEMENT -> 405 -> 505 -> DBA Series IV Calipers -> Teves Calipers
Vehicle: 1990 Peugeot 405 S 1.9 L4 GAS
405
- Raise and support front of vehicle, then remove wheel and tire assembly.
- Drain a portion of brake fluid from master cylinder reservoir.
- Disconnect brake wear wire, then remove bolt (1) while holding guide (2), Fig. .
- Swing caliper up on its remaining mounting bolt and remove brake pads.
- Check for leaks around piston, seal, boots and holes.
- Check wear on old disc and proper sliding action of piston. Replace all parts showing wear or damage.
- Clean and inspect piston surface, caliper and disc. Push piston back to the end of its travel.
- Reverse procedure to install.
505
DBA S...
CLICK HERE TO GET FULL ACCESS TO 1990 Peugeot 405 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Peugeot 405 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Peugeot 405 cars and light trucks from 1990+.
PEUGEOT, DISC BRAKES -> REAR CALIPER SERVICE -> 405 -> Installation -> Removal
Vehicle: 1990 Peugeot 405 MI16 1.9 L4 GAS
405
Removal
- Remove brake pads, then loosen nut on brake line.
- Place plug in brake line and save pipe retainer.
- Remove hose and plug caliper hole.
- Remove bolt to immobilize guide, then disconnect parking brake cable from caliper.
- Remove caliper. Do not drain brake fluid from caliper.
Installation
- Replacement caliper are supplied with brake fluid. To prevent unnecessary bleeding, do not drain fluid when installing...
CLICK HERE TO GET FULL ACCESS TO 1990 Peugeot 405 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Peugeot 405 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Peugeot 405 cars and light trucks from 1990+.
PEUGEOT, DISC BRAKES -> REAR CALIPER SERVICE -> 405 -> Installation -> Removal
Vehicle: 1990 Peugeot 405 DL 1.9 L4 GAS
405
Removal
- Remove brake pads, then loosen nut on brake line.
- Place plug in brake line and save pipe retainer.
- Remove hose and plug caliper hole.
- Remove bolt to immobilize guide, then disconnect parking brake cable from caliper.
- Remove caliper. Do not drain brake fluid from caliper.
Installation
- Replacement caliper are supplied with brake fluid. To prevent unnecessary bleeding, do not drain fluid when installing...
CLICK HERE TO GET FULL ACCESS TO 1990 Peugeot 405 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Peugeot 405 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Peugeot 405 cars and light trucks from 1990+.
PEUGEOT, DISC BRAKES -> FRONT BRAKE PADS REPLACEMENT -> 405 -> 505 -> DBA Series IV Calipers -> Teves Calipers
Vehicle: 1990 Peugeot 405 DL 1.9 L4 GAS
405
- Raise and support front of vehicle, then remove wheel and tire assembly.
- Drain a portion of brake fluid from master cylinder reservoir.
- Disconnect brake wear wire, then remove bolt (1) while holding guide (2), Fig. .
- Swing caliper up on its remaining mounting bolt and remove brake pads.
- Check for leaks around piston, seal, boots and holes.
- Check wear on old disc and proper sliding action of piston. Replace all parts showing wear or damage.
- Clean and inspect piston surface, caliper and disc. Push piston back to the end of its travel.
- Reverse procedure to install.
505
DBA S...
CLICK HERE TO GET FULL ACCESS TO 1990 Peugeot 405 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Peugeot 405 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Peugeot 405 cars and light trucks from 1990+.
PEUGEOT, ANTI-LOCK BRAKE SYSTEM -> TROUBLESHOOTING -> 405 MODELS
Vehicle: 1990 Peugeot 405 DL 1.9 L4 GAS
405 MODELS
Refer to Fig. anti-lock ...
CLICK HERE TO GET FULL ACCESS TO 1990 Peugeot 405 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1990 Peugeot 405 vehicle.
|
| Access the Complete guide! |
