Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Audi 90 car and truck
repair procedures including Audi engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Audi 90 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Audi 90
- 1991 Audi 90 2.3 L5 GAS, CC:2309, Fuel Injection, Engine VIN:, Desg:C
- 1991 Audi 90 2.3 L5 GAS, CC:2309, Fuel Injection, Engine VIN:, Desg:D
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Audi 90 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Audi 90 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Less Attached Wheel Bearing Housing -> W/Attached Wheel Bearing Housing
Vehicle: 1991 Audi 90 2.3 L5 GAS
W/Attached Wheel Bearing Housing
- Loosen wheel bolts.
- Remove wheel hub to axle shaft bolt.
- Raise and support vehicle, then remove washer and wheel.
- Remove axle shaft flange, nut from link rod, and control arm to stabilizer bar to subframe mounting bolts.
- Push control arm downward, then press axle shaft out of hub using a suitable puller.
- Reverse procedure to install, noting the following:
- Ensure splines on stub axle and wheel hub are free of oil, grease and old locking compound.
- Apply a .2 inch (5mm) band of D6 locking compound around end of outer CV joint splines, then install ax...
CLICK HERE TO GET FULL ACCESS TO 1991 Audi 90 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Audi 90 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Audi 90 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Less Attached Wheel Bearing Housing -> W/Attached Wheel Bearing Housing
Vehicle: 1991 Audi 90 2.3 L5 GAS
W/Attached Wheel Bearing Housing
- Loosen wheel bolts.
- Remove wheel hub to axle shaft bolt.
- Raise and support vehicle, then remove washer and wheel.
- Remove axle shaft flange, nut from link rod, and control arm to stabilizer bar to subframe mounting bolts.
- Push control arm downward, then press axle shaft out of hub using a suitable puller.
- Reverse procedure to install, noting the following:
- Ensure splines on stub axle and wheel hub are free of oil, grease and old locking compound.
- Apply a .2 inch (5mm) band of D6 locking compound around end of outer CV joint splines, then install ax...
CLICK HERE TO GET FULL ACCESS TO 1991 Audi 90 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Audi 90 vehicle.
|
| Access the Complete guide! |
