Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Dodge Stealth car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Dodge Stealth automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Dodge Stealth
- 1991 Dodge Stealth 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:S
- 1991 Dodge Stealth ES 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:B
- 1991 Dodge Stealth R/T 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:B
- 1991 Dodge Stealth R/T Turbo 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:C
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Stealth cars and light trucks from 1990+.
ANTI-LOCK BRAKES -> Type 5-Anti-Lock Braking System (Laser/Talon & Stealth) -> COMPONENT SERVICE -> AWD Models -> ELECTRONIC CONTROL UNIT, REPLACE -> Front -> FWD MODELS -> G SENSOR, REPLACE -> HYDRAULIC UNIT, REPLACE -> Rear -> WHEEL SPEED SENSOR, REPLACE
Vehicle: 1991 Dodge Stealth 3.0 V6 GAS
HYDRAULIC UNIT, REPLACE
- Remove splash shield, relay box, and air duct, if necessary.
- Disconnect brake tube connections, then harness connections.
- Remove bracket bolts.
- Remove hydraulic unit bolts, then hydraulic unit.
- Remove ground wire.
- This unit cannot be disassembled. Do not drop or turn upside down.
- Reverse procedure to install.
WHEEL SPEED SENSOR, REPLACE
FWD MODELS
Front
- Raise and support vehicle.
- Remove front speed sensor rotors, then speed sensor attaching clips.
- Remove front speed sensor and bracket.
- Reverse procedure to install, noting the following:
- Clearance between speed sensor ...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Stealth BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Stealth cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEM, CHRYSLER CORP. -> HYDRAULIC SYSTEM BLEEDING & FLUSHING -> BENCH BLEEDING -> BLEEDING MASTER CYLINDER -> DESCRIPTION -> Eagle Medallion & Premier -> Except Eagle Medallion & Premier -> Manual Bleeding -> ON-VEHICLE SERVICE -> Precautions -> Pressure Bleeding
Vehicle: 1991 Dodge Stealth R/T 3.0 V6 GAS
DESCRIPTION
Bleeding the hydraulic brake system is necessary if air has entered the system. A few causes for this condition are low fluid level, a hydraulic fluid leak, a hydraulic line is opened, or replacement of a hydraulic system component. Symptoms can be noted by an improper or loss of brake operation, and/or a low or spongy brake pedal.
Flushing the hydraulic brake system is necessary if contaminates are found in the hydraulic system. A few causes for hydraulic system contamination are moisture, age of hydraulic system parts and fluid, or improper fluid...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Stealth BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Stealth cars and light trucks from 1990+.
DISC BRAKES, CHRYSLER CORP. -> Type 15-MR45V & MR58V Dual Pin Floating Caliper Disc Brake, Rear -> ADJUSTMENTS -> PARKING BRAKE, ADJUST
Vehicle: 1991 Dodge Stealth ES 3.0 V6 GAS
PARKING BRAKE, ADJUST
- Pull parking brake lever with a force of approximately 45 lbs. while counting number of clicks.
- Lever should click 3-5 times.
- If not wi...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Stealth BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Stealth cars and light trucks from 1990+.
DRUM BRAKES, CHRYSLER CORP. -> Type 2 & 3-Kelsey-Hayes & Varga Leading Trailing Drum Brakes -> INSPECTION
Vehicle: 1991 Dodge Stealth 3.0 V6 GAS
Refer to "General Informa... "
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Stealth BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Stealth cars and light trucks from 1990+.
POWER BRAKE UNITS, CHRYSLER CORP. -> BENDIX DIAPHRAGM TYPES -> OPERATION
Vehicle: 1991 Dodge Stealth R/T Turbo 3.0 V6 GAS
These units are of the vacuum suspended type. Some units are of the single diaphragm type,Fig. , while others are of the tandem diaphragm type,Fig. . Both single piston and double piston or split system type master cylinders are used.
The vacuum suspended diaphragm type units utilize engine manifold vacuum and atmospheric pressure for its power. It consists of three basic elements combined into a single power unit. The three basic elements of the single diaphragm type are:
- A vacuum power section which includes a front and rear shell, a power diaphragm, a return spring...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Stealth BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Stealth cars and light trucks from 1990+.
DRUM BRAKES, CHRYSLER CORP. -> General Information -> GENERAL INSPECTION -> ADJUSTER MECHANISM -> BACKING PLATE -> BRAKE DRUMS -> BRAKE LININGS & SPRINGS -> PARKING BRAKE CABLE
Vehicle: 1991 Dodge Stealth 3.0 V6 GAS
BRAKE DRUMS
Any time the brake drums are removed for brake service, the braking surface diameter should be checked with a suitable brake drum micrometer at several points to determine if they are within the safe oversize limit stamped on the brake drum outer surface. If the braking surface diameter exceeds specifications, the drum must be replaced. If the braking surface diameter is within specifications, drums should be cleaned and inspected for cracks, scores, deep grooves, taper, out of round and heat spotting. If drums are cracked or heat spotted, they must be replaced. Sc...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Stealth BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Dodge Stealth vehicle.
|
| Access the Complete guide! |
