Auto Parts Search
![Get Full Access](/images/get-full-access.gif)
We have info for following modifications of 1991 Honda CRX
- 1991 Honda CRX SI 1.6 L4 GAS, CC:1590, Fuel Injection
- 1991 Honda CRX HF 1.5 L4 GAS, CC:1493, Fuel Injection
- 1991 Honda CRX 1.5 L4 GAS, CC:1493, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Honda CRX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Honda CRX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Honda CRX 1.5 L4 GAS
Replacement procedures for left and right driveshafts are the same.
- Raise and support front of vehicle, then remove front wheels.
- Drain transaxle.
- Raise locking tab on spindle nut, then remove nut.
- Remove self-locking nut and self-locking bolt. Replace self-locking bolt if you can easily thread a non-self-locking nut past their nylon locking inserts.
- Remove damper fork, then cotter pin from lower arm ball joint castle nut and remove nut.
- Install hex nut on ball joint. Ensure nut is flush with ball joint pin end, or threaded section of ball joint pin might be damaged by ball joi...
CLICK HERE TO GET FULL ACCESS TO 1991 Honda CRX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Honda CRX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Honda CRX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Honda CRX SI 1.6 L4 GAS
Replacement procedures for left and right driveshafts are the same.
- Raise and support front of vehicle, then remove front wheels.
- Drain transaxle.
- Raise locking tab on spindle nut, then remove nut.
- Remove self-locking nut and self-locking bolt. Replace self-locking bolt if you can easily thread a non-self-locking nut past their nylon locking inserts.
- Remove damper fork, then cotter pin from lower arm ball joint castle nut and remove nut.
- Install hex nut on ball joint. Ensure nut is flush with ball joint pin end, or threaded section of ball joint pin might be damaged by ball joi...
CLICK HERE TO GET FULL ACCESS TO 1991 Honda CRX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Honda CRX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Honda CRX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Honda CRX HF 1.5 L4 GAS
Replacement procedures for left and right driveshafts are the same.
- Raise and support front of vehicle, then remove front wheels.
- Drain transaxle.
- Raise locking tab on spindle nut, then remove nut.
- Remove self-locking nut and self-locking bolt. Replace self-locking bolt if you can easily thread a non-self-locking nut past their nylon locking inserts.
- Remove damper fork, then cotter pin from lower arm ball joint castle nut and remove nut.
- Install hex nut on ball joint. Ensure nut is flush with ball joint pin end, or threaded section of ball joint pin might be damaged by ball joi...
CLICK HERE TO GET FULL ACCESS TO 1991 Honda CRX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |