Auto Parts Search

BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 560SEC AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 560SEC cars and light trucks from 1990+.
MERCEDES-BENZ -> REAR DISC BRAKE SERVICE -> 190D & E, 260E & 300CE, E & TE -> Assembly -> BRAKE CALIPER, REPLACE -> BRAKE PADS, REPLACE -> CALIPER OVERHAUL -> Disassembly -> EXCEPT 190D & E, 260E & 300CE, E & TE -> Inspection -> TEVES, BENDIX & GIRLING TYPE CALIPERS
Vehicle: 1991 MERCEDES-BENZ 560SEC 5.6 V8 GAS
BRAKE CALIPER, REPLACE
EXCEPT 190D & E, 260E & 300CE, E & TE
- Open caliper bleeder screw, and pump brake fluid from rear brake circuit.
- On 1st version (early production) vehicles or vehicles with starting torque compensation, disconnect and cap brake line from caliper assembly, Fig. .
- On 2nd version (later production) vehicles, loosen frame floor bracket brake hose from brake line. Disconnect brake line from caliper. Cap all open connections.
- On all models, loosen locking plate, if so equipped.
- Remove caliper attaching bolts.
- Reverse procedure to install, noting the following:
- Wh...
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 560SEC BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 560SEC AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 560SEC cars and light trucks from 1990+.
MERCEDES-BENZ, HYDRAULIC BRAKE SYSTEMS -> HYDRAULIC BRAKE SYSTEMS -> HYDRAULIC BRAKE SPECIFICATIONS
Vehicle: 1991 MERCEDES-BENZ 560SEC 5.6 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 560SEC BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 560SEC AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 560SEC cars and light trucks from 1990+.
MERCEDES-BENZ, ANTI-LOCK BRAKE SYSTEMS -> DESCRIPTION
Vehicle: 1991 MERCEDES-BENZ 560SEC 5.6 V8 GAS
The four wheel Anti-Lock Brake system (ABS), Figs. through , uses a control unit, hydraulic actuator and wheel speed sensors to control brake fluid pressure and prevent wheel lock during severe braking conditions. With this system, directional stability is improved and steering is maintained even during braking on wet, sandy, snowy or icy road conditions.
...
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 560SEC BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 560SEC AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 560SEC cars and light trucks from 1990+.
MERCEDES-BENZ, ANTI-LOCK BRAKE SYSTEMS -> SYSTEM SERVICE -> BLEEDING HYDRAULIC SYSTEM
Vehicle: 1991 MERCEDES-BENZ 560SEC 5.6 V8 GAS
Refer to Figs. through , when servicing system components.
BLEEDING HYDRAULIC SYSTEM
On 400SE, 500SEL and 600SEL models, the master cylinder brake switch over valve must be electrically activated to bleed the additional pressure chamber.
- With ignition in Off position, empty pressure reservoir at bleeder valve SP, then close valve, ...
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 560SEC BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 560SEC AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 560SEC cars and light trucks from 1990+.
MERCEDES-BENZ, ANTI-LOCK BRAKE SYSTEMS -> SYSTEM COMPONENTS -> ELECTRONIC CONTROL UNIT -> LATERAL ACCELERATION SENSOR -> WHEEL SPEED SENSORS
Vehicle: 1991 MERCEDES-BENZ 560SEC 5.6 V8 GAS
ELECTRONIC CONTROL UNIT
There are several different control units available they are: models 124 and 201 with engine 103 and 104 less speed signal output, model 129 with engine 104 with speed signal output, model 126 with engine 116 and 117 less speed signal output, model 129 with engine 119 with speed signal output and model 140 with engines 104, 119, 120 and 603 has diagnostic capabilities. To prevent interchanging control units there are two lugs cast in the control unit connector and at the front clasp there is a notch located in different positions for different model/engi...
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 560SEC BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 MERCEDES-BENZ 560SEC AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 MERCEDES-BENZ 560SEC cars and light trucks from 1990+.
MERCEDES-BENZ, POWER BRAKES -> POWER BRAKE UNIT REPLACEMENT
Vehicle: 1991 MERCEDES-BENZ 560SEC 5.6 V8 GAS
On Models Equipped With Anti-Lock Brake Systems, Refer To "Anti-Lock Brake Systems."
- Disable airbag system as described in "Airbag System Disarming."
- On vehicles with manual transmission, disconnect hose and move toward master cylinder.
- On all mode...
CLICK HERE TO GET FULL ACCESS TO 1991 MERCEDES-BENZ 560SEC BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |