Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Nissan Stanza car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Nissan Stanza automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1991 Nissan Stanza AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Nissan Stanza cars and light trucks from 1990+.
MITSUBISHI, HYDRAULIC BRAKE SYSTEM -> PROPORTIONING VALVE -> Except Pickup, Van/Wagon & 1992 Montero -> Pickup, Van/Wagon & 1992 Montero -> TESTING
Vehicle: 1991 Nissan Stanza 2.4 L4 GAS
TESTING
Except Pickup, Van/Wagon & 1992 Montero
- Connect two pressure gauges to proportioning valve, one to the output side and one to the input side, Fig. .
- Bleed system after connecting gauges.
- Depress brake pedal, check that measured values are within specifications as shown in "Specifications".
Pickup, Van/Wagon & 1992 Montero
- Check load proportioning valve spring length with vehicle on flat ground.
- Press load sensor lever and measure distance between spring ends, Fig. .
- On all models except 1992 Montero, distance should be between 6.93-7.05 inch. On 1992 Montero distance should be...
CLICK HERE TO GET FULL ACCESS TO 1991 Nissan Stanza BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Nissan Stanza AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Nissan Stanza cars and light trucks from 1990+.
NISSAN, ANTI-LOCK BRAKES -> TROUBLESHOOTING
Vehicle: 1991 Nissan Stanza 2.4 L4 GAS
The electronic control unit accepts input signals from sensors and drives actuators. It is essential that both input and outp...
CLICK HERE TO GET FULL ACCESS TO 1991 Nissan Stanza BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Nissan Stanza AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Nissan Stanza cars and light trucks from 1990+.
MITSUBISHI, HYDRAULIC BRAKE SYSTEM -> MASTER CYLINDER BLEED
Vehicle: 1991 Nissan Stanza 2.4 L4 GAS
- If master cylinder has been replaced or overhauled and reservoir is empty, proceed as follows:
- Disconnect brake lines from master cylinder.
- Depress pedal slowly...
CLICK HERE TO GET FULL ACCESS TO 1991 Nissan Stanza BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Nissan Stanza AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Nissan Stanza cars and light trucks from 1990+.
MITSUBISHI, POWER BRAKE UNITS -> TROUBLESHOOTING
Vehicle: 1991 Nissan Stanza 2.4 L4 GAS
- Run engine for two minutes, then turn engine off. Depress brake pedal slowly several times.
- Pedal should go down further the first time and rise gradually the second and third time, Fig. . If this happens the booster is good condition. If pedal height stays the same booster is faulty.
- With engine off, depress brake pedal several times, Fi...
CLICK HERE TO GET FULL ACCESS TO 1991 Nissan Stanza BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Nissan Stanza AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Nissan Stanza cars and light trucks from 1990+.
NISSAN, HYDRAULIC BRAKE SYSTEM -> BRAKE BLEEDING PROCEDURE -> ANTI-LOCK BRAKES -> LESS ANTI-LOCK BRAKES
Vehicle: 1991 Nissan Stanza 2.4 L4 GAS
LESS ANTI-LOCK BRAKES
Do not spill brake fluid on painted surfaces, it may cause damage to the paint. If brake fluid is spilled, wash immediately with water.
- Place container under master cylinder to avoid spillage, then fill master cylinder with brake fluid.
- Connect hose to bleeder valves, then depress brake pedal several times.
- With pressure applied to pedal open bleeder valve to release air trapped in system.
- Close bleeder, then release pedal slowly.
- Repeat steps 3 and 4 as outlined above until all air is removed from system.
- Bleed air from system in order as follows:
- Left re...
CLICK HERE TO GET FULL ACCESS TO 1991 Nissan Stanza BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Nissan Stanza AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Nissan Stanza cars and light trucks from 1990+.
NISSAN, DISC BRAKES -> PARKING BRAKE ADJUSTMENT
Vehicle: 1991 Nissan Stanza 2.4 L4 GAS
Refer to "Dr... "
CLICK HERE TO GET FULL ACCESS TO 1991 Nissan Stanza BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Nissan Stanza vehicle.
|
| Access the Complete guide! |
