Auto Parts Search
Nissan Stanza CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Nissan REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Year
| 1992 | 1991 | 1990 | 1989 |
| 1988 | 1987 | 1986 | 1985 |
| 1984 | 1983 | 1982 |
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about Nissan Stanza car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your Nissan Stanza automobile. Try the Automotix DIY solution today!
A/C & HEATER SERVICE PROCEDURES FOR Nissan Stanza AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported Nissan Stanza cars and light trucks from 1990+
Nissan -> MANUAL AIR CONDITIONING & HEATER SYSTEM DIAGNOSIS & TESTING -> A/C SYSTEM DIAGNOSIS & TESTING -> 240SX -> 300ZX -> Maxima -> Maxima, NX Coupe, NX1600, NX2000, Sentra, Stanza & 240SX -> NX Coupe, NX1600, NX2000 & Sentra -> Pathfinder & Pickup -> Stanza -> SYSTEM DIAGNOSIS -> SYSTEM OPERATION TEST -> SYSTEM PERFORMANCE TEST
Vehicle: 1991 Nissan Stanza 2.4 L4 GAS
SYSTEM OPERATION TEST
Refer to Figs. and , for basic manual heating and A/C test procedure.
- Start and operate engine until normal operating temperature is reached.
- Operate system in all control positions, noting the following:
- Check that air is discharged from correct outlets.
- Check that blower motor operates at all control speeds. If blower motor fails to operate properly, refer to the appropriate diagnostic charts.
- Check heater operation and refer to the appropriate diagnostic charts to isolate any malfunctions. ...
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza A/C & HEATER SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR Nissan Stanza AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported Nissan Stanza cars and light trucks from 1990+.
NISSAN, DRUM BRAKES -> PARKING BRAKE ADJUSTMENT -> 240SX -> AXXESS -> MAXIMA -> NX COUPE, PULSAR, SENTRA, STANZA & 1990-92 300ZX -> PATHFINDER & PICKUP -> VAN
Vehicle: 1992 Nissan Stanza 2.4 L4 GAS
AXXESS
- Pull parking brake lever with a force of 44 lbs. and ensure lever travels 10-11 notches on models less 4WD or 12-13 notches on models w/4WD.
- On 4WD models, rotate adjuster, Fig. , until proper stroke is obtained, then tighten locknut.
- On models less 4WD, remove parking brake cover and adjuster cap, then adjust control lever by turning adjusting nut until proper stroke is obtained.
MAXIMA
- Pull parking brake lever with a force of 44 lbs. and ensure lever travels 9-11.
- Rotate adjuster, Fig. until proper stroke is obtained, then tighten locknut.
NX COUPE, PULSAR, SENTRA, S...
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR Nissan Stanza AUTOMOBILES
Fuel filter replacement procedures with corresponding images for most domestic and imported Nissan Stanza cars and light trucks sold in the U.S. for 1980+.
Nissan/Datsun -> Component Locations -> 1990-92 Stanza 2.4L Engine
Vehicle: 1991 Nissan Stanza 2.4 L4 GAS
Refer ...
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR Nissan Stanza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported Nissan Stanza cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
- Remove wheel bearing lock nut. Tie rod does not need to be disconnected from steering knuckle. Suspend steering knuckle with wire so as not to stretch brake hose. Do not pull or twist brake hose.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Separate drive shaft from steering knuckle by lightly tapping it. If it is hard to remove, use a puller. When removing drive shaft, cover boots with shop towel to prevent damage to them.
- Remove right drive shaf...
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR Nissan Stanza AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported Nissan Stanza cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
- Remove engine undercover.
- Remove drive belt from alternator.
- Disconnect harness co...
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza STARTER & ALTERNATOR REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR Nissan Stanza AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported Nissan Stanza cars and light trucks sold in the U.S. from 1990+.
Nissan -> Check Suspension Warning Lamp ->
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
This lamp may indicate a malfunction in the auto-leveling suspension. After diagnosis and rep...
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR Nissan Stanza AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported Nissan Stanza cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at thermostat housing.
- Remove hose from thermostat housing.
- Remove hose from vehicle.
- Reverse proc...
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR Nissan Stanza AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported Nissan Stanza cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
- Loosen lock nut on alternator.
- Loosen adjusting bolt on alternator.
- Remove alternator, power steering and water pump drive belt.
- Loosen pulley bolt on air conditioning compressor drive belt idler pulley.
- Remove air conditioning compressor drive belt.
- Reverse procedure to inst...
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR Nissan Stanza AUTOMOBILES
Component location diagrams for most Nissan Stanza cars and light trucks sold in the U.S. from 1990+.
 Door Harness (LH Rear) Diagram for 1991 Nissan Stanza 2.4 L4 GASComponents on diagram: |
 Instrument Harness Diagram for 1991 Nissan Stanza 2.4 L4 GASComponents on diagram: |
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR Nissan Stanza AUTOMOBILES
OEM drawn wiring diagrams for most Nissan Stanza cars and light trucks sold in the U.S.
 1989 Nissan Stanza 2.0 L4 GAS Wiring DiagramComponents on diagram: |
 1991 Nissan Stanza 2.4 L4 GAS Wiring DiagramComponents on diagram: |
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR Nissan Stanza AUTOMOBILES
OEM TSB listings for most Nissan Stanza cars and light trucks sold in the U.S. from 1985+.
|
Document: HEATER - PERFORMANCE INFORMATION Vehicle: 1991 Nissan Stanza 2.4 L4 GAS Auto Systems: |
|
Document: WARRANTY POLICY - REFRIGERANT REIMBURSEMENT Vehicle: 1987 Nissan Stanza 2.0 L4 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR Nissan Stanza AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most Nissan Stanza cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most Nissan Stanza cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most Nissan Stanza cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most Nissan Stanza cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO Nissan Stanza SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
| More parts |
