Auto Parts Search
1990 Nissan Stanza CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Nissan REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- A/C & Heater Service
- Brake Service
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Starter & Alternator Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
A/C & HEATER SERVICE PROCEDURES FOR 1990 Nissan Stanza AUTOMOBILES
A/C & Cooling System Maintenance -> Nissan -> 1990-2002
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza A/C & HEATER SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Nissan Stanza AUTOMOBILES
NISSAN, POWER BRAKE UNITS -> TROUBLESHOOTING
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
- With engine off, depress brake pedal several times. There should be no change in pedal stroke.
- With brake pedal depressed, start engine. Pedal should go down slightly.
- Run engine for two minutes, then turn engine off. Depress brake pedal slowly several times.
- Pe...
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR 1990 Nissan Stanza AUTOMOBILES
Nissan/Datsun -> Fuel Filter Replacement -> Except Armada, Murano, Titan & 350Z, 2006-02 Altima, 2000-06 Maxima & Sentra -> Fuel System Pressure Relief -> Removal & Installation
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
Fuel System Pressure Relief
- On all models except 1990-96 300ZX, remove the fuel pump fuse from the fuse panel.
- On 1990-96 300ZX, disconnect the fuel pump relay, located behind the lefthand side kick panel.
- On all models, start and run the engine until it stalls.
- After the engine stalls, crank two or three times to ensure all fuel pressure is relieved.
- On all models except 1990-96 300ZX, turn the ignition Off, then install the fuel pump fuse.
- On 1990-96 300ZX, turn the ignition Off, then connect the fuel pump relay.
Removal &...
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Nissan Stanza AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
- Remove wheel bearing lock nut. Tie rod does not need to be disconnected from steering knuckle. Suspend steering knuckle with wire so as not to stretch brake hose. Do not pull or twist brake hose.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Separate drive shaft from steering knuckle by lightly tapping it. If it is hard to remove, use a puller. When removing drive shaft, cover boots with shop towel to prevent damage to them.
- Remove right drive shaf...
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Nissan Stanza AUTOMOBILES
Alternator, Replace
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
- Remove engine undercover.
- Remove drive belt from alternator.
- Disconnect harness co...
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza STARTER & ALTERNATOR REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Nissan Stanza AUTOMOBILES
Nissan -> Check Engine Lamp ->
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
The Check Engine lamp will light when the ignition is on with engine not running. When the engine is started, then lamp should go out. If it does not, a diagnostic trouble code has been stor...
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1990 Nissan Stanza AUTOMOBILES
Radiator, Replace
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
- Disconnect battery ground cable and drain coolant.
- Disconnect radiator upper and lower hoses.
- On models with automatic transmission, remove automatic transmiss...
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1990 Nissan Stanza AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 1990 Nissan Stanza 2.4 L4 GAS
- Loosen lock nut on alternator.
- Loosen adjusting bolt on alternator.
- Remove alternator, power steering and water pump drive belt.
- Loosen pulley bolt on air conditioning compressor drive belt idler pulley.
- Remove air conditioning compressor drive belt.
- Reverse procedure to inst...
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 1990 Nissan Stanza AUTOMOBILES
Component location diagrams for most 1990 Nissan Stanza cars and light trucks sold in the U.S. from 1990+.
Automatic Seat Belt System Component Locations Diagram for 1990 Nissan Stanza 2.4 L4 GAS Components on diagram: |
Engine Harness No.2 Connector Locations Diagram for 1990 Nissan Stanza 2.4 L4 GAS Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 1990 Nissan Stanza AUTOMOBILES
OEM drawn wiring diagrams for most 1990 Nissan Stanza cars and light trucks sold in the U.S.
1990 Nissan Stanza 2.4 L4 GAS Wiring Diagram Components on diagram: |
1990 Nissan Stanza 2.4 L4 GAS Wiring Diagram Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 1990 Nissan Stanza AUTOMOBILES
OEM TSB listings for most 1990 Nissan Stanza cars and light trucks sold in the U.S. from 1985+.
Document: A/C SYSTEM O-RING SEAL LEAKS Vehicle: 1990 Nissan Stanza 2.4 L4 GAS Auto Systems: |
Document: WINDSHIELD CRACKING Vehicle: 1990 Nissan Stanza 2.4 L4 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 1990 Nissan Stanza AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1990 Nissan Stanza cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1990 Nissan Stanza cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1990 Nissan Stanza cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1990 Nissan Stanza cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Stanza SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1990 Nissan Stanza vehicle. |
Access the Complete guide! |