Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Toyota MR2 car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Toyota MR2 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Toyota MR2
- 1991 Toyota MR2 2.2 L4 GAS, CC:2164, Fuel Injection, Engine VIN:, Desg:S
- 1991 Toyota MR2 2.0 L4 GAS, CC:1998, Fuel Injection, Engine VIN:, Desg:S
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Toyota MR2 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Toyota MR2 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Toyota MR2 2.2 L4 GAS
The hub bearing may be damaged if it is subjected to vehicle weight, such as when moving vehicle with driveshaft removed. Therefore, if it is absolutely necessary to place vehicle weight on hub bearing, first support it with hub support tool No. 09608-16041, or equivalent.
- Raise and support vehicle.
- Remove engine undercovers, then drain transaxle oil.
- Remove cotter pin from axle shaft, then locknut cap.
- With emergency brake applied, remove axle shaft nut.
- With brake applied, remove six rear driveshaft to transaxle side gear shaft attaching nuts, then raise and support rear of ...
CLICK HERE TO GET FULL ACCESS TO 1991 Toyota MR2 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Toyota MR2 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Toyota MR2 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Toyota MR2 2.0 L4 GAS
The hub bearing may be damaged if it is subjected to vehicle weight, such as when moving vehicle with driveshaft removed. Therefore, if it is absolutely necessary to place vehicle weight on hub bearing, first support it with hub support tool No. 09608-16041, or equivalent.
- Raise and support vehicle.
- Remove engine undercovers, then drain transaxle oil.
- Remove cotter pin from axle shaft, then locknut cap.
- With emergency brake applied, remove axle shaft nut.
- With brake applied, remove six rear driveshaft to transaxle side gear shaft attaching nuts, then raise and support rear of ...
CLICK HERE TO GET FULL ACCESS TO 1991 Toyota MR2 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Toyota MR2 vehicle.
|
| Access the Complete guide! |
