Auto Parts Search
We have info for following modifications of 1993 GEO Prizm
- 1993 GEO Prizm LSI 1.6 L4 GAS, CC:1588, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:6
- 1993 GEO Prizm LSI 1.8 L4 GAS, CC:1788, CID:110, Fuel Injection, Aspiration:110, Engine VIN:, Desg:8
- 1993 GEO Prizm 1.6 L4 GAS, CC:1588, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:6
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 GEO Prizm AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 GEO Prizm cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 GEO Prizm LSI 1.6 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Drain transaxle fluid.
- Remove hub nut cap, then cotter pin, hub nut and washer.
- Remove tie rod end from steering knuckle.
- Remove brake caliper from steering knuckle.
- Disconnect control arm from steering knuckle.
- Remove brake rotor.
- Remove drive axle from hub assembly using a plastic hammer. If shaft is difficult to remove, use crankshaft gear puller (Tool No. J 25287) or equivalent.
- R...
CLICK HERE TO GET FULL ACCESS TO 1993 GEO Prizm DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 GEO Prizm AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 GEO Prizm cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 GEO Prizm 1.6 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Drain transaxle fluid.
- Remove hub nut cap, then cotter pin, hub nut and washer.
- Remove tie rod end from steering knuckle.
- Remove brake caliper from steering knuckle.
- Disconnect control arm from steering knuckle.
- Remove brake rotor.
- Remove drive axle from hub assembly using a plastic hammer. If shaft is difficult to remove, use crankshaft gear puller (Tool No. J 25287) or equivalent.
- R...
CLICK HERE TO GET FULL ACCESS TO 1993 GEO Prizm DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 GEO Prizm AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 GEO Prizm cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 GEO Prizm LSI 1.8 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Drain transaxle fluid.
- Remove hub nut cap, then cotter pin, hub nut and washer.
- Remove tie rod end from steering knuckle.
- Remove brake caliper from steering knuckle.
- Disconnect control arm from steering knuckle.
- Remove brake rotor.
- Remove drive axle from hub assembly using a plastic hammer. If shaft is difficult to remove, use crankshaft gear puller (Tool No. J 25287) or equivalent.
- R...
CLICK HERE TO GET FULL ACCESS TO 1993 GEO Prizm DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1993 GEO Prizm vehicle. |
Access the Complete guide! |