Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Isuzu Pickup car and truck
repair procedures including Isuzu engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Isuzu Pickup automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Isuzu Pickup
- 1993 Isuzu Pickup 2.3 L4 GAS, CC:2254, Carburetor, Engine VIN:, Desg:L
- 1993 Isuzu Pickup 2.6 L4 GAS, CC:2559, Fuel Injection, Engine VIN:, Desg:E
- 1993 Isuzu Pickup Normal CAB 2.3 L4 GAS, CC:2254, Carburetor, Engine VIN:, Desg:L
- 1993 Isuzu Pickup Normal CAB 2.6 L4 GAS, CC:2559, Fuel Injection, Engine VIN:, Desg:E
- 1993 Isuzu Pickup Normal CAB 3.1 V6 GAS, CC:3137, Fuel Injection, Engine VIN:, Desg:Z
BRAKE SERVICE PROCEDURES FOR 1993 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Isuzu Pickup cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> Amigo, Pickup & Rodeo -> Amigo, Pickup, Rodeo & Trooper w/Rear Wheel ABS -> Amigo, Pickup, Rodeo & Trooper w/Rear Wheel ABS (RWAL) -> Brake System Bleed -> Component Replacement -> Electronic Brake Control Module (EBCM) -> Electronic Control Module (ECM) -> Front Speed Sensor -> G-Sensor -> Hydraulic Unit -> Isolation/Dump Valve -> Rear Speed Sensor -> Speed Sensor -> Trooper w/Four Wheel ABS -> Trooper w/Rear Wheel ABS
Vehicle: 1993 Isuzu Pickup Normal CAB 2.6 L4 GAS
Brake System Bleed
Refer to "Hydraulic Brake System" for brake bleeding procedure.
Component Replacement
These components are non-serviceable and must be replaced as a unit, do not try to disassemble components.
Hydraulic Unit
Trooper w/Four Wheel ABS
- Disconnect electrical connectors from unit.
- Remove upper battery hold-down bracket.
- Disconnect brake lines from unit, then cap ends to prevent entry of foreign material.
- Disconnect hydraulic unit ground lead, then remove front retaining bracket.
- Remove nuts retaining unit, then hydraulic unit from vehicle.
- Reverse procedure to install, noting th...
CLICK HERE TO GET FULL ACCESS TO 1993 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Isuzu Pickup cars and light trucks from 1990+.
Anti-lock Brakes -> Description -> Amigo, Pickup, Rodeo & Trooper w/Rear Wheel ABS -> Trooper w/Four Wheel ABS
Vehicle: 1993 Isuzu Pickup Normal CAB 2.3 L4 GAS
Trooper w/Four Wheel ABS
The anti-lock brake system works on all four wheels. A combination of wheel speed sensor and electronic brake control module (EBCM) determines when a wheel is about to stop turning and adjusts brake pressure to maintain best braking. This system helps the driver maintain greater control of the vehicle under heavy braking conditions.
Amigo, Pickup, Rodeo & Trooper w/Rear Wheel ABS
The rear wheel anti-lock (RWAL) system continuously monitors rear wheel rotation during braking and corrects rear ...
CLICK HERE TO GET FULL ACCESS TO 1993 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Isuzu Pickup cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Amigo & Pickup -> Inspection -> Installation -> Overhaul -> Removal -> Replace -> Rodeo -> Stylus -> Trooper
Vehicle: 1993 Isuzu Pickup 2.6 L4 GAS
Replace
Stylus
Removal
- On models with turbocharger, remove air duct and air cleaner assembly, then remove intercooler assembly.
- On all models, remove master cylinder.
- Disconnect vacuum hose, then yoke clevis from brake pedal.
- Remove vacuum booster retaining nuts, then vacuum booster from vehicle.
Inspection
- Inspect the check valve, which is installed inside the vacuum hose. Air passage should be able to flow in one direction only.
- Air should pass freely from the vacuum booster to the engine.
- Air should not pass from the engine to the vacuum booster. If it does, ...
CLICK HERE TO GET FULL ACCESS TO 1993 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Isuzu Pickup cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> Brake Pedal -> Parking Brake -> Rear Disc Brakes -> Rear Drum Brakes -> Service Brake -> Stylus
Vehicle: 1993 Isuzu Pickup 2.6 L4 GAS
Brake Pedal
Stylus
Measure the brake pedal height after making sure the pedal is fully released by the pedal return spring. Measure pedal height as shown in Fig. , dimension " L." Measurement should be 6.22 inches. If measurement is not as specified, proceed as follows:
- Loosen the stop lamp switch.
- Loosen locknut on the pushrod.
- Adjust the pushrod to the specified pedal height.
- Tighten locknut.
Amigo, Hombre, Pickup & Rodeo
- Measure brake pedal height and freeplay, Fig. , with brake pedal fully released.
- Pedal height should be 6.85-7.24 inches. Pedal freeplay should be .23-.35 inch.
- If measurem...
CLICK HERE TO GET FULL ACCESS TO 1993 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Isuzu Pickup cars and light trucks from 1990+.
Hydraulic Brake Systems -> Hydraulic Brake System Specifications
Vehicle: 1993 Isuzu Pickup 2.3 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 1993 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Isuzu Pickup cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> Amigo & Pickup -> Brake Booster Pushrod -> Rodeo -> Trooper
Vehicle: 1993 Isuzu Pickup Normal CAB 2.6 L4 GAS
Brake Booster Pushrod
Amigo & Pickup
- Apply 19.7 inches of Hg negative pressure to vacuum servo.
- Measure pushrod length from tip to face, Fig. . Length should be .717 inch.
- Ensure brake pedal spring will fully return brake pedal and measure pedal height.
- Pedal height is taken from the bare floor, carpeting and mat removed, to the face of the rubber brake pedal cover.
- Pedal height must be measured after starting and revving engine several times.
- Pedal height should be 6.85-7.24 inches when fully released and 3.7 inches when a force of 110 lbs. has been applied to brake pedal.
- Pedal free play ...
CLICK HERE TO GET FULL ACCESS TO 1993 Isuzu Pickup BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
