Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Mercury Tracer car and truck
repair procedures including Mercury engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Mercury Tracer automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Mercury Tracer
- 1993 Mercury Tracer 1.9 L4 GAS, CID:116, Fuel Injection, Aspiration:116, Engine VIN:, Desg:J
- 1993 Mercury Tracer LTS 1.8 L4 GAS, CID:112, Fuel Injection, Aspiration:112, Engine VIN:, Desg:8
BRAKE SERVICE PROCEDURES FOR 1993 Mercury Tracer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mercury Tracer cars and light trucks from 1990+.
Anti-lock Brakes -> Aspire, Escort & Tracer -> Description -> ANTI-LOCK BRAKE CONTROL MODULE -> ANTI-LOCK BRAKE SENSORS -> Aspire -> BRAKE FLUID LEVEL SWITCH -> BRAKE MASTER CYLINDER -> BRAKE PRESSURE CONTROL VALVE -> Escort & Tracer -> HYDRAULIC ANTI-LOCK ACTUATOR ASSEMBLY -> OPERATION -> POWER BRAKE BOOSTER -> SYSTEM COMPONENTS
Vehicle: 1993 Mercury Tracer 1.9 L4 GAS
SYSTEM COMPONENTS
POWER BRAKE BOOSTER
The power brake booster reduces the effort required to push the brake pedal and apply the brakes. Engine vacuum allows for this power assist.
A vacuum booster hose from the engine contains a vacuum booster hose check valve. When the engine is shut off, the valve closes, trapping engine vacuum within the power brake booster. This reserve vacuum allows for several assisted brake applications with the engine off.
BRAKE MASTER CYLINDER
Aspire
The brake master cylinder is a tandem hydraulic servo. When the brake pedal is pressed, the brake master cylinder ...
CLICK HERE TO GET FULL ACCESS TO 1993 Mercury Tracer BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Mercury Tracer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mercury Tracer cars and light trucks from 1990+.
Anti-lock Brakes -> Aspire, Escort & Tracer -> Troubleshooting -> Inspection & Verification
Vehicle: 1993 Mercury Tracer 1.9 L4 GAS
Inspection & Verification
Verify concern by driving vehicle. Look for problems in other areas which may affect ABS: suspension and steering components, tire integrity and air pressure, wheel bearings and brake components common to all brake systems. The hydraulic anti-lock actuator assembly is not serviceable...
CLICK HERE TO GET FULL ACCESS TO 1993 Mercury Tracer BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Mercury Tracer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mercury Tracer cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> DUAL MASTER CYLINDER BLEEDING NOTES -> SYSTEM PRIMING -> TESTING DUAL MASTER CYLINDERS -> WHEEL BLEEDING SEQUENCE
Vehicle: 1993 Mercury Tracer LTS 1.8 L4 GAS
Pressure bleeding is recommended for all hydraulic brake systems.
The bleeding operation itself is fairly well standardized. First step in all cases is cleaning the dirt from the filler cap before removing it from the master cylinder. This should be done thoroughly.
Pressure bleeding is fastest because the master cylinder doesn't have to be refilled several times, and the job can be done by one man. To prevent air from the pressure tank getting into the lines, do not shake the tank while air is being added to the tank or after it has been pressurized. Set the tank in the requir...
CLICK HERE TO GET FULL ACCESS TO 1993 Mercury Tracer BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Mercury Tracer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mercury Tracer cars and light trucks from 1990+.
Anti-lock Brakes -> Aspire, Escort & Tracer -> Diagnosis & Testing -> Aspire -> CLEARING DIAGNOSTIC TROUBLE CODES -> CONTINUOUS TEST -> Escort & Tracer -> KEY ON-ENGINE RUNNING (KOER) TEST -> ON-BOARD DIAGNOSTICS -> PINPOINT TESTS -> QUICK TEST -> RETRIEVING DIAGNOSTIC TROUBLE CODES -> Using Analog VOM -> Using Rotunda Super STAR II -> WARNING INDICATOR
Vehicle: 1993 Mercury Tracer 1.9 L4 GAS
QUICK TEST
For Quick Test, refer to Figs. and on Aspire models and Figs. and on Escort and Tracer models.
WARNING INDICATOR
The anti-lock brake warning indicator will come on to warn the driver of an ABS failure. Normal brake system operation will still be available. However, the wheels will lock up under hard braking.
ON-BOARD DIAGNOSTICS
On-Board Diagnostics is divided into two specialized tests, the "Key ON-Engine Running (KOER) Test" and the "Continuous Test." Before performing either test, inspect the anti-lock brake warning indicator to verify a fault has been detected by t...
[[table data]] [[table data]]CLICK HERE TO GET FULL ACCESS TO 1993 Mercury Tracer BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Mercury Tracer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mercury Tracer cars and light trucks from 1990+.
Hydraulic Brake Systems -> HYDRAULIC TUBING -> DOUBLE FLARE/INVERTED SEAT
Vehicle: 1993 Mercury Tracer 1.9 L4 GAS
Never use copper tubing as a replacement for steel tubing. Copper tubing is subject to fatigue cracking and corrosion which could result in brake system failure.
Steel tubing is used to conduct hydraulic pressure to the brakes. All fittings, tubing and hose should be inspected for rusted, damaged or defective flared seats. The tubing is equipped with a double flare/inverted seat or I.S.O. flare to insure more positive seating in the fitting. To repair or reflare tubing, proceed as follows:
DOUBLE FLARE/INVERTED SEAT
- Cut off the damaged seat or damaged tubing.
- Ream out any burrs or ...
CLICK HERE TO GET FULL ACCESS TO 1993 Mercury Tracer BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Mercury Tracer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mercury Tracer cars and light trucks from 1990+.
Disc Brakes -> Rear Disc Brakes & Parking Brakes -> INSPECTION
Vehicle: 1993 Mercury Tracer 1.9 L4 GAS
Remove wheels and inspect brake disc, caliper and linings. The wheel bearings should be inspected at this time and repacked if necessary. Do not get any grease on the linings.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
Should it become necessary to remove the caliper when installing new parts, clean all parts in alcohol, then wipe dry using lint-free cloths. Using an air hose, blow out drilled passages and bores. Check dust boots for punctures or tears. If punctures or tears are evident, install new boots during assembly.
In...
CLICK HERE TO GET FULL ACCESS TO 1993 Mercury Tracer BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
