Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Pontiac Lemans car and truck
repair procedures including Pontiac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Pontiac Lemans automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Pontiac Lemans
- 1993 Pontiac Lemans SE 1.6 L4 GAS, CC:1588, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:6
- 1993 Pontiac Lemans Value Leader 1.6 L4 GAS, CC:1588, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:6
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Pontiac Lemans AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Pontiac Lemans cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Pontiac Lemans Value Leader 1.6 L4 GAS
- Loosen both upper strut mount attaching bolts.
- Remove wheel cover, then loosen wheel lug nuts and remove cotter pin and drive axle shaft-to-hub nut and washer.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove ball joint retaining clip and stud nut, then separate ball joint from steering knuckle using ball joint separator tool No. J-36226 or equivalent. Disregard ``This Side Towards Wheel'' marking on tool. Tool must be turned to opposite position when used on these vehicles.
- Remove tie rod nut, then separate tie rod from steering knuckle using tie rod separato...
CLICK HERE TO GET FULL ACCESS TO 1993 Pontiac Lemans DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Pontiac Lemans AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Pontiac Lemans cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Pontiac Lemans SE 1.6 L4 GAS
- Loosen both upper strut mount attaching bolts.
- Remove wheel cover, then loosen wheel lug nuts and remove cotter pin and drive axle shaft-to-hub nut and washer.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove ball joint retaining clip and stud nut, then separate ball joint from steering knuckle using ball joint separator tool No. J-36226 or equivalent. Disregard ``This Side Towards Wheel'' marking on tool. Tool must be turned to opposite position when used on these vehicles.
- Remove tie rod nut, then separate tie rod from steering knuckle using tie rod separato...
CLICK HERE TO GET FULL ACCESS TO 1993 Pontiac Lemans DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



