Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Saab 900 car and truck
repair procedures including Saab engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Saab 900 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Saab 900
- 1993 Saab 900 2.0 L4 GAS, CC:1985, Fuel Injection, Engine VIN:, Desg:L
- 1993 Saab 900 S 2.1 L4 GAS, CC:2119, Fuel Injection, Engine VIN:, Desg:E
- 1993 Saab 900 Turbo Commemorative Edition 2.0 L4 GAS, CC:1985, Fuel Injection, Engine VIN:, Desg:T
BRAKE SERVICE PROCEDURES FOR 1993 Saab 900 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Saab 900 cars and light trucks from 1990+.
Anti-lock Brakes -> Mark II Anti-Lock Brake System Less Traction Control -> Troubleshooting
Vehicle: 1993 Saab 900 2.0 L4 GAS
Perform the following quick checks:
- Check brake fluid level, noting the following:
- Ensure accumulator is fully charged with fluid.
- Turn ignition switch to On position and check fluid level after hydraulic pump cuts out.
- Fill as necessary with DOT 4 brake fluid to brin...
CLICK HERE TO GET FULL ACCESS TO 1993 Saab 900 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Saab 900 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Saab 900 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> 1994-96 900 -> 9000 & 1993 900
Vehicle: 1993 Saab 900 S 2.1 L4 GAS
9000 & 1993 900
- Ensure brake fluid reservoir is full.
- Connect transparent hose to bleed nipple of brake caliper.
- Place other end of hose into clear container.
- Depress brake pedal, then open bleed nipple. Close nipple as soon as pedal reaches floor. Repeat this until no air bubbles are visible in fluid.
- Repeat previous step at each brake caliper, then refill fluid reservoir. On models with Anti-Lock Brake Systems (ABS), front calipers must be bled before rear calipers.
1994-96 900
- Unscrew cover of brake fluid reservoir and top off with brake fluid.
- Connect topping-off fitting fr...
CLICK HERE TO GET FULL ACCESS TO 1993 Saab 900 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Saab 900 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Saab 900 cars and light trucks from 1990+.
Anti-lock Brakes -> Mark II Anti-Lock Brake System w/Traction Control -> System Service -> Brake System Bleed -> Calibrating ETS ECU -> Component Replacement -> Control Valve For Turbo Bypass Valve -> Non-Return Valve -> Safety Valve -> TC/ABS ECU -> TC/ABS Hydraulic Unit
Vehicle: 1993 Saab 900 Turbo Commemorative Edition 2.0 L4 GAS
Calibrating ETS ECU
Calibration must be carried out after replacing any major system component, such as ETS ECU, TC/ABS ECU, pedal potentiometer or throttle housing.
- Start and run engine until normal operating temperature is reached. If the engine will not run correctly during warm up cycle, establish ISAT communications and enter command code 974 in order to enter basic data and enable warm up to be completed.
- Switch off engine. Connect ISAT and capacitor lead, part No. 86-11-048, to Black diagnostic connector.
- Turn ignition On, select DIAG, ONE system from menu, and enter system nu...
CLICK HERE TO GET FULL ACCESS TO 1993 Saab 900 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Saab 900 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Saab 900 cars and light trucks from 1990+.
Anti-lock Brakes -> Mark II Anti-Lock Brake System Less Traction Control -> System Service -> 900 -> 9000 -> Accumulator, Replace -> Brake Fluid Reservoir, Replace -> Brake System Bleed -> Component Replacement -> ECU, Replace -> Front -> Hydraulic Unit, Replace -> Pressure Switch, Replace -> Pump & Motor Unit, Replace -> Pump Delivery Line, Replace -> Rear -> Valve Block, Replace -> Wheel Sensors, Replace
Vehicle: 1993 Saab 900 2.0 L4 GAS
Brake System Bleed
Front brake calipers must be bled first.
- Fill fluid reservoir to the top.
- Connect a length of transparent hose to right front caliper bleed nipple and place other end of hose into a clear container.
- While depressing brake pedal, open bleed nipple. Repeat until there are no more air bubbles visible in hose.
- Connect hose to left front caliper and repeat bleed process.
- Connect hose to rear caliper, switch on ignition and repeat bleed process. Pump motor must not run for more than two minutes at a time. After motor has been running, let it cool for approximately 10 minut...
CLICK HERE TO GET FULL ACCESS TO 1993 Saab 900 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Saab 900 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Saab 900 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> 1994-96 900 -> 9000 & 1993 900
Vehicle: 1993 Saab 900 Turbo Commemorative Edition 2.0 L4 GAS
9000 & 1993 900
- Ensure brake fluid reservoir is full.
- Connect transparent hose to bleed nipple of brake caliper.
- Place other end of hose into clear container.
- Depress brake pedal, then open bleed nipple. Close nipple as soon as pedal reaches floor. Repeat this until no air bubbles are visible in fluid.
- Repeat previous step at each brake caliper, then refill fluid reservoir. On models with Anti-Lock Brake Systems (ABS), front calipers must be bled before rear calipers.
1994-96 900
- Unscrew cover of brake fluid reservoir and top off with brake fluid.
- Connect topping-off fitting fr...
CLICK HERE TO GET FULL ACCESS TO 1993 Saab 900 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Saab 900 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Saab 900 cars and light trucks from 1990+.
Anti-lock Brakes -> Mark II Anti-Lock Brake System Less Traction Control -> Troubleshooting
Vehicle: 1993 Saab 900 Turbo Commemorative Edition 2.0 L4 GAS
Perform the following quick checks:
- Check brake fluid level, noting the following:
- Ensure accumulator is fully charged with fluid.
- Turn ignition switch to On position and check fluid level after hydraulic pump cuts out.
- Fill as necessary with DOT 4 brake fluid to brin...
CLICK HERE TO GET FULL ACCESS TO 1993 Saab 900 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1993 Saab 900 vehicle.
|
| Access the Complete guide! |
