Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Subaru Legacy car and truck
repair procedures including Subaru engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Subaru Legacy automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Subaru Legacy
- 1993 Subaru Legacy L 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
- 1993 Subaru Legacy LS SP 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
- 1993 Subaru Legacy LSI 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
- 1993 Subaru Legacy Sport 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
- 1993 Subaru Legacy 4X4 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
- 1993 Subaru Legacy L 4X4 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
- 1993 Subaru Legacy LS 4X4 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
BRAKE SERVICE PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Master Cylinder
Vehicle: 1993 Subaru Legacy LSI 2.2 H4 GAS
Master Cylinder
- Remove master cylinder from vehicle.
- Remove secondary piston stopper screw with screwdriver as shown in Fig. .
- Push piston inward, then remove snap ring.
- Apply pressure to piston assembly while Inserting a small screwdriver into window of piston retainer and raise piston retainer latch as shown in Fig. .
- Remove primary and secondary piston assemblies. Do not disassemble pistons. if disassembled, the spring settings will change.
- Inspect master cylinder inside diameter to piston clearance, Service limit is not to exceed 0.043 inch.
- Clean...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
Anti-lock Brakes -> SVX & 1993-94 Legacy -> Description
Vehicle: 1993 Subaru Legacy LS SP 2.2 H4 GAS
The Anti-lock brake system (ABS) electrically controls brake fluid pressure to prevent wheel lock during braking on slippery road surfaces, improving steering stability and shortening the braking distance. If the ABS becomes inoperative, a fail-safe system activates to ensure conventional brake system operation.
The front and rear wheels utilize a four sensor, four channel control design. The...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Dual Proportioning Valve (DPV) -> Master Cylinder
Vehicle: 1993 Subaru Legacy LSI 2.2 H4 GAS
Master Cylinder
The master cylinder is of the tandem type design and incorporates a fast fill valve in order to improve the feeling on braking. It has a dual design which consists of a primary and a secondary brake system. If one brake system becomes inoperative, the other line will provide braking action. The master cylinder is designed into a "pierce" form so that ...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> Drum Brake -> Parking Brake
Vehicle: 1993 Subaru Legacy LS 4X4 2.2 H4 GAS
Parking Brake
- On models except Impreza, pull parking brake lever three to five times. Mechanism should click six to seven times when a force of 55 lbs. is exerted on the lever.
- On Impreza, pull parking brake lever three to five times. Mechanism should click six times when a force of 44 lbs. is exerted on the lever.
- On Loyale, if lever operation is not as specified, rotate the equalizer cable adjustment nut until play at " A" in Fig. , is set at 0-.02 inch (0-.5mm).
- On Justy, if lever operation is not as specified, adjust lever stroke at parking brake rod until ...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Brake Booster, Replace -> Except SVX -> Overhaul -> SVX
Vehicle: 1993 Subaru Legacy L 4X4 2.2 H4 GAS
Brake Booster, Replace
Except SVX
- Disconnect brake fluid level indicator connector, if equipped.
- Remove master cylinder assembly.
- Disconnect vacuum hose from brake booster.
- Working from inside the passenger compartment, remove snap pin and operating rod clevis pin from brake pedal assembly.
- Remove brake booster retaining nuts, then brake booster from vehicle.
- Reverse procedure to install. Torque brake booster retaining nuts to 9-17 ft. lbs.
SVX
- Disconnect battery ground cable.
- Raise and support vehicle and remov...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Front -> Rear
Vehicle: 1993 Subaru Legacy LS 4X4 2.2 H4 GAS
Front
Refer to Figs. through , when performing the following procedure.
- Raise and support vehicle.
- Remove front wheels.
- On Loyale models, remove outer parking brake cable clip and disconnect cable.
- On Legacy Turbo and SVX models, disconnect brake hose from strut.
- On all except Justy with 12 inch wheels, remove caliper lockpin, then rotate caliper on guide pin.
- On Justy with 12 inch wheels, remove caliper-to-support retaining bolts, then the boot protector and caliper.
- On all models, remove brake pads from support.
- Reverse procedure to install no...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1993 Subaru Legacy vehicle.
|
| Access the Complete guide! |
