Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Subaru Legacy car and truck
repair procedures including Subaru engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Subaru Legacy automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Subaru Legacy
- 1993 Subaru Legacy L 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
- 1993 Subaru Legacy LS SP 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
- 1993 Subaru Legacy LSI 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
- 1993 Subaru Legacy 4X4 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
- 1993 Subaru Legacy L 4X4 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
- 1993 Subaru Legacy LS 4X4 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:6
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Installation -> Removal
Vehicle: 1993 Subaru Legacy 4X4 2.2 H4 GAS
Removal
- Put matching marks on affected parts.
- Remove bolts which hold front propeller shaft to rear propeller shaft.
- Place companion flange in a vise and remove stake nut. Be sure not to hold propeller shaft pipe portion in vise.
- Drive out companion flange with a puller or press. Before disassembling, put matching mark on affected parts.
- Lightly tap head of front propeller shaft with a copper hammer u...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1993 Subaru Legacy 4X4 2.2 H4 GAS
Front
- Raise and support vehicle.
- Remove front wheels.
- Remove and discard axle nut.
- Remove stabilizer and transverse link from crossmember.
- Using a drift and hammer, remove and discard DOJ spring pin, Fig. .
- Remove DOJ from transmission spindle.
- Remove driveshaft assembly. If necessary, use puller tool No. 926470000 or equivalent.
- Inspect all parts for wear, damage or corrosion and replace as necessary.
- Reverse procedure to install, noting the following:
- Torque axle nut to 137 ft. lbs.
- Torque stabilizer link to 24 to 31 ft. lbs.
- Torque transverse link to 29 ft. lbs.
- Torque wheel lug nu...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1993 Subaru Legacy LSI 2.2 H4 GAS
Front
- Raise and support vehicle.
- Remove front wheels.
- Remove and discard axle nut.
- Remove stabilizer and transverse link from crossmember.
- Using a drift and hammer, remove and discard DOJ spring pin, Fig. .
- Remove DOJ from transmission spindle.
- Remove driveshaft assembly. If necessary, use puller tool No. 926470000 or equivalent.
- Inspect all parts for wear, damage or corrosion and replace as necessary.
- Reverse procedure to install, noting the following:
- Torque axle nut to 137 ft. lbs.
- Torque stabilizer link to 24 to 31 ft. lbs.
- Torque transverse link to 29 ft. lbs.
- Torque wheel lug nu...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1993 Subaru Legacy LS SP 2.2 H4 GAS
Front
- Raise and support vehicle.
- Remove front wheels.
- Remove and discard axle nut.
- Remove stabilizer and transverse link from crossmember.
- Using a drift and hammer, remove and discard DOJ spring pin, Fig. .
- Remove DOJ from transmission spindle.
- Remove driveshaft assembly. If necessary, use puller tool No. 926470000 or equivalent.
- Inspect all parts for wear, damage or corrosion and replace as necessary.
- Reverse procedure to install, noting the following:
- Torque axle nut to 137 ft. lbs.
- Torque stabilizer link to 24 to 31 ft. lbs.
- Torque transverse link to 29 ft. lbs.
- Torque wheel lug nu...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Installation -> Removal
Vehicle: 1993 Subaru Legacy L 2.2 H4 GAS
Removal
- Put matching marks on affected parts.
- Remove bolts which hold front propeller shaft to rear propeller shaft.
- Place companion flange in a vise and remove stake nut. Be sure not to hold propeller shaft pipe portion in vise.
- Drive out companion flange with a puller or press. Before disassembling, put matching mark on affected parts.
- Lightly tap head of front propeller shaft with a copper hammer u...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Subaru Legacy AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Subaru Legacy cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1993 Subaru Legacy L 4X4 2.2 H4 GAS
Front
- Raise and support vehicle.
- Remove front wheels.
- Remove and discard axle nut.
- Remove stabilizer and transverse link from crossmember.
- Using a drift and hammer, remove and discard DOJ spring pin, Fig. .
- Remove DOJ from transmission spindle.
- Remove driveshaft assembly. If necessary, use puller tool No. 926470000 or equivalent.
- Inspect all parts for wear, damage or corrosion and replace as necessary.
- Reverse procedure to install, noting the following:
- Torque axle nut to 137 ft. lbs.
- Torque stabilizer link to 24 to 31 ft. lbs.
- Torque transverse link to 29 ft. lbs.
- Torque wheel lug nu...
CLICK HERE TO GET FULL ACCESS TO 1993 Subaru Legacy DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1993 Subaru Legacy vehicle.
|
| Access the Complete guide! |
