Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1994 Chevrolet S10 Blazer car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1994 Chevrolet S10 Blazer automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1994 Chevrolet S10 Blazer
- 1994 Chevrolet S10 Blazer 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:Z
- 1994 Chevrolet S10 Blazer 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:W
A/C & HEATER SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+
Electrical Symbol & Wire Color Code Identification -> Wire Color Code Identification -> Domestic Vehicles
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> THERMOSTAT, REPLACE -> ASTRO, BRAVADA, SAFARI & S & T Series -> C, G, K & P SERIES -> Diesel Engine -> Gasoline Engine -> LUMINA APV, SILHOUETTE & TRANS SPORT -> TRACKER
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
C, G, K & P SERIES
Gasoline Engine
- Disconnect battery ground cable.
- Remove engine cover, air cleaner and air inlet duct, as necessary.
- Drain cooling system until radiator coolant level is below thermostat level.
- Remove radiator hose at coolant outlet.
- Remove thermostat housing attaching bolts and ground wire, if applicable.
- Remove thermostat housing, thermostat and gasket.
- Reverse procedure to install.
Diesel Engine
- Disconnect batteries.
- Remove upper fan shroud, then drain engine coolant b...
CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+
Air Bag System Precautions -> General Motors Corp. -> Disarming -> 1990 -> 1990-93 -> 1990-95 -> 1990-97 -> 1991 -> 1991-93 -> 1991-94 -> 1991-95 -> 1992-93 -> 1992-99 -> 1993-2002 -> 1993-94 -> 1993-98 -> 1994 -> 1994-2002 -> 1994-95 -> 1994-96 -> 1994-98 -> 1995-2002 -> 1995-96 -> 1995-97 -> 1995-98 -> 1995-99 -> 1996 -> 1996-2001 -> 1996-97 -> 1997 -> 1997-2002 -> 1997-98 -> 1997-99 -> 1998-2000 -> 1998-2002 -> 1998-99 -> 1999 -> 1999-2000 -> 1999-2001 -> 1999-2002 -> 2000-02 -> 2001-02 -> 2002 -> 2003 -> 2003-04 -> 2003-04 Except Malibu Maxx -> Achieva & Skylark -> Alero -> Astro & Safari -> Aurora -> Avalanche -> Aveo -> Aztek & Rendezvous -> Beretta & Corsica -> Blazer, Jimmy, Sonoma & S-10 -> Bonneville, Eighty-Eight, LeSabre, LSS, Ninety-Eight & Regency -> Bravada, Envoy, Rainier, SSR & TrailBlazer -> C/K Series -> Camaro & Firebird -> Canyon & Colorado -> Caprice, Custom Cruiser & Roadmaster -> Catera -> Cavalier & Sunfire -> Century -> Corvette -> Coupe -> CTS -> Cutlass -> Cutlass Ciera & Cruiser -> Cutlass Supreme -> DeVille -> Eldorado -> Escalade -> Express, G Series & Savana -> Fleetwood -> Grand Am -> Grand Prix & Intrigue -> Impala -> ION -> L-Series -> Light Trucks & Vans -> Lumina -> Lumina APV, Montana, Silhouette, Trans Sport & Venture -> Malibu -> Malibu Maxx -> Metro -> Monte Carlo -> Park Avenue -> Passenger Cars -> Prizm -> Reatta, Toronado & Trofeo -> Regal -> Riviera -> S-Series -> Sedan -> Seville -> Sierra & Silverado -> SRX -> Storm -> Suburban, Tahoe, Yukon & Yukon XL -> Tracker -> Vibe -> VUE -> XLR -> Zone 1 -> Zone 10 -> Zone 12 -> Zone 2 -> Zone 3 -> Zone 4 -> Zone 5 -> Zone 6 -> Zone 7 -> Zone 8 -> Zone 9 -> Zones 1 & 7 -> Zones 2 & 6 -> Zones 5 & 9 -> Zones 7 & 9
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
Passenger Cars
The Sensing and Diagnostic Module (SDM) can maintain enough voltage to cause air bag deployment for up to 10 minutes after the ignition is turned Off and the battery is disconnected. Servicing the Supplemental air bag (SIR) system during this period may result in accidental deployment and personal injury.
Achieva & Skylark
1994-96
- Ensure front wheels are in straight-ahead position.
- Turn ignition switch to LOCK position.
- Remove AIR BAG fuse from fuse block.
- On 1995 models, remove lefthand sound insulator panel to ac...
CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> EXPANSION TUBE (ORIFICE), REPLACE -> FRONT UNIT
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
FRONT UNIT
- Recover refrigerant from A/C system.
- Loosen nut at liquid line to evaporator inlet pipe connection. Carefully remove tube, using needle nose pliers or other suitable tool. If expansion tube is seized in its receptacle, remove impacted residue as completely as possible. Using a suitable heat gun or equivalent (hair dryer), apply heat to area 1/4 inches from inlet pi...
CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+
Compressor Service -> Application Chart -> Trucks & Vans
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+
Air Bag System Precautions -> General Motors Corp. -> Arming -> Light Trucks & Vans -> Passenger Cars
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
Passenger Cars
Reverse disarming procedures to arm the Supplemental Restraint System, noting the following:
- Ensure all disconnected SRS electrical connectors are securely connected and routed.
- Install all removed fuses in proper locations.
- From a safe position at sides of or below air bag module, Turn ignition switch to ON position and observe Air Bag or SRS warning lamp.
- On all models except Prizm and 1990 Corvette, warning lamp should flash seven to nine times, then go off.
- On Prizm models, warning lamp should light for six seconds,...
CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1994 Chevrolet S10 Blazer vehicle.
|
| Access the Complete guide! |
