Auto Parts Search

We have info for following modifications of 1994 Chevrolet S10 Blazer
- 1994 Chevrolet S10 Blazer 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:Z
- 1994 Chevrolet S10 Blazer 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:W
BRAKE SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+.
Anti-lock Brakes -> Four Wheel Anti-Lock Brake System -> Diagnosis & Testing -> 1992-95 -> 1992-95 Except S & T Series w/VCM & VCM-A -> 1992-95 Models & 1996 S & T Series w/VCM -> 1995 S & T Series w/VCM & VCM-A & 1996 -> 1996 -> 1996 Except S & T Series w/VCM -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Trouble Code Interpretation -> Except S & T Series w/VCM & VCM-A -> S & T Series w/VCM & VCM-A
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
Accessing Diagnostic Trouble Codes
Except S & T Series w/VCM & VCM-A
1992-95
Diagnostic trouble codes can be read using a TECH 1 scan tool or by jumping terminal "H" to terminal "A" of the Assembly Line Diagnostic Link (ALDL) connector, Fig. , and counting the Anti-Lock lamp flashes. The terminals must be jumped for a few seconds before the diagnostic trouble codes will begin to flash.
1996
Diagnostic trouble codes can only be read by connecting a suitable scan tool to the Data Link Connector (DLC), Fig. . Follow the instructions provided by the scan tool manufacturer.
S & T Seri...
[[table data]] [[table data]] [[table data]]CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+.
Disc Brakes -> Bendix Single Piston Sliding Caliper -> Precautions -> Brake Disc Service -> Brake Lines & Linings -> Brake Roughness -> General
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
Brake Lines & Linings
Remove one of the front wheels and inspect the brake disc, caliper and linings.
Do not allow any oil or grease on the linings. It is recommended that all linings be replaced in sets when worn or damaged.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
Brake Roughness
The most common cause of brake chatter on disc brakes is a variation in thickness of the disc. If roughness or vibration is encountered during highway operation or if pedal pumping is experienced at low speeds, the disc may have excessive thickne...
CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+.
Disc Brakes -> Delco-Moraine Single Piston Caliper -> Brake System Bleed -> C/K, G & M/L Series -> C/K, G, M/L, P & S/T Series -> Lumina APV, Silhouette & Trans Sport -> Manual Bleeding -> P Series -> Pressure Bleeding -> S/T Series -> Tracker
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
The braking system can be bled manually or with pressure bleeding equipment. If bleeding manually, check fluid level frequently.
Brake fluid should never be reused. Before driving the vehicle, check brake operation to ensure a firm pedal has been obtained.
Brake fluid will damage electrical connections and painted surfaces. Use shop cloths, suitable containers, and fender covers to prevent brake fluid from contacting these areas. Always seal and wipe off brake fluid containers to prevent spills.
Manual Bleeding
C/K, G, M/L, P & S/T Series
- If vehicle is equipped with a vacuum or hy...
CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+.
Anti-lock Brakes -> Rear Wheel Anti-Lock Brake System -> Precautions -> General Service Precautions
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
General Service Precautions
Avoid contact with brake fluid when servicing the anti-lock brake syste...
CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Bendix Master Cylinder -> Cast Iron Type -> Composite Type -> Delco-Moraine Master Cylinder -> Disassemble -> Inspection -> Tracker Master Cylinder -> Wheel Cylinder
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
Delco-Moraine Master Cylinder
Composite Type
When performing the following procedures, refer to Fig. for all models except Lumina APV, Silhouette & Trans Sport, noting that the composite reservoir may vary in design. Refer to Fig. for Lumina APV, Silhouette & Trans Sport models.
Disassemble
- Remove master cylinder from vehicle.
- Remove reservoir cover and diaphragm. Discard old brake fluid in reservoir.
- Inspect cover and diaphragm. Replace if cut, cracked or deformed.
- Remove fluid level switch and proportioning valve assembly, if equipped.
- Depress primary piston and remove lock ring.
- P...
CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Chevrolet S10 Blazer AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Chevrolet S10 Blazer cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Hydraulic Control Valves -> Master Cylinder
Vehicle: 1994 Chevrolet S10 Blazer 4.3 V6 GAS
Master Cylinder
Some vehicles use a conventional tandem master cylinder with two hydraulic pistons operating inline. The primary piston controls the front brake system and the secondary piston controls the rear brake system.
Other models use a master cylinder that operates the same as the conventional master cylinder, but also incorporates a quick take-up feature in the rear chamber to reduce excessive pedal travel which may result from increased fluid displacement required to move the low drag caliper piston out against the rotor.
The quick take-up uses a spring-loaded ball check valv...
CLICK HERE TO GET FULL ACCESS TO 1994 Chevrolet S10 Blazer BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |