Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1994 Dodge Dakota car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1994 Dodge Dakota automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1994 Dodge Dakota
- 1994 Dodge Dakota 3.9 V6 GAS, CID:239, Fuel Injection, Aspiration:239, Engine VIN:, Desg:X
- 1994 Dodge Dakota 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
- 1994 Dodge Dakota 2.5 L4 GAS, CC:2507, CID:153, Fuel Injection, Aspiration:153, Engine VIN:, Desg:G
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Dakota cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> With Universal Joint Replacement Tool -> Without Universal Joint Replacement Tool
Vehicle: 1994 Dodge Dakota 5.2 V8 GAS
With Universal Joint Replacement Tool
Disassemble
- Place driveshaft in a vise, using care to avoid damaging it.
- Remove bearing retaining snap rings. Some universal joints use injected nylon retainers in place of snap rings. During servicing, snap rings supplied with replacement universal joint assembly must be used.
- Position tool on shaft and press bearing out of yoke. If bearing cannot be pressed all way out, remove it using vise grips or channel lock pliers or strike center yoke with hammer. Mark yoke and shaft to ensure they will be reassembled in their same relative p...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Dakota cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 1994 Dodge Dakota 5.2 V8 GAS
Front
- Position transmission and transfer case to their neutral positions. Raise and support vehicle. Remove skid plate, if equipped.
- Mark a line across transfer case flange and CV for installation reference.
- Mark a line across propeller shaft flange yoke and front axle companion flange for installation reference.
- Remove companion flange bolts.
- Remove transfer case flange bolts and remove propeller shaft.
- Reverse procedure to install, noting the following:
- Align reference marks.
- Torque companion flange and flange yoke bolts to 80 ft. lbs.
- Torque transfer case companion flange bolts to...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Dakota cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> With Universal Joint Replacement Tool -> Without Universal Joint Replacement Tool
Vehicle: 1994 Dodge Dakota 3.9 V6 GAS
With Universal Joint Replacement Tool
Disassemble
- Place driveshaft in a vise, using care to avoid damaging it.
- Remove bearing retaining snap rings. Some universal joints use injected nylon retainers in place of snap rings. During servicing, snap rings supplied with replacement universal joint assembly must be used.
- Position tool on shaft and press bearing out of yoke. If bearing cannot be pressed all way out, remove it using vise grips or channel lock pliers or strike center yoke with hammer. Mark yoke and shaft to ensure they will be reassembled in their same relative p...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Dakota cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 1994 Dodge Dakota 2.5 L4 GAS
Front
- Position transmission and transfer case to their neutral positions. Raise and support vehicle. Remove skid plate, if equipped.
- Mark a line across transfer case flange and CV for installation reference.
- Mark a line across propeller shaft flange yoke and front axle companion flange for installation reference.
- Remove companion flange bolts.
- Remove transfer case flange bolts and remove propeller shaft.
- Reverse procedure to install, noting the following:
- Align reference marks.
- Torque companion flange and flange yoke bolts to 80 ft. lbs.
- Torque transfer case companion flange bolts to...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Dakota cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> With Universal Joint Replacement Tool -> Without Universal Joint Replacement Tool
Vehicle: 1994 Dodge Dakota 2.5 L4 GAS
With Universal Joint Replacement Tool
Disassemble
- Place driveshaft in a vise, using care to avoid damaging it.
- Remove bearing retaining snap rings. Some universal joints use injected nylon retainers in place of snap rings. During servicing, snap rings supplied with replacement universal joint assembly must be used.
- Position tool on shaft and press bearing out of yoke. If bearing cannot be pressed all way out, remove it using vise grips or channel lock pliers or strike center yoke with hammer. Mark yoke and shaft to ensure they will be reassembled in their same relative p...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Dakota AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Dakota cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 1994 Dodge Dakota 3.9 V6 GAS
Front
- Position transmission and transfer case to their neutral positions. Raise and support vehicle. Remove skid plate, if equipped.
- Mark a line across transfer case flange and CV for installation reference.
- Mark a line across propeller shaft flange yoke and front axle companion flange for installation reference.
- Remove companion flange bolts.
- Remove transfer case flange bolts and remove propeller shaft.
- Reverse procedure to install, noting the following:
- Align reference marks.
- Torque companion flange and flange yoke bolts to 80 ft. lbs.
- Torque transfer case companion flange bolts to...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Dakota DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1994 Dodge Dakota vehicle.
|
| Access the Complete guide! |
