Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1994 Dodge Stealth car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1994 Dodge Stealth automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1994 Dodge Stealth
- 1994 Dodge Stealth 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:H
- 1994 Dodge Stealth R/T Turbo 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:K
- 1994 Dodge Stealth R/T Sport 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:J
BRAKE SERVICE PROCEDURES FOR 1994 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Dodge Stealth cars and light trucks from 1990+.
Anti-lock Brakes -> Type 4--Anti-Lock Braking System -> System Service -> AWD Models -> Brake System Bleed -> Component Replacement -> ELECTRONIC CONTROL UNIT -> Front -> FWD MODELS -> G SENSOR -> HYDRAULIC UNIT -> Rear -> WHEEL SPEED SENSOR
Vehicle: 1994 Dodge Stealth 3.0 V6 GAS
Brake System Bleed
- If brake fluid has been drained from master cylinder, bleed as follows:
- Fill reservoir with DOT 3 brake fluid, then depress and hold brake pedal.
- With master cylinder outlet port plugged, release brake pedal.
- Repeat 3 to 4 times, refilling reservoir as necessary.
- With engine running, bleed brake lines as follows:
- Bleed line to wheel that is diagonally opposite master cylinder.
- Bleed line to wheel that is nearest to master cylinder.
- Bleed line to remaining rear wheel, then to remaining front wheel.
- Ensure master cylinder is kept full.
- When adding brake fluid, fit filter t...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Stealth BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Dodge Stealth cars and light trucks from 1990+.
Hydraulic Brake Systems -> HYDRAULIC CONTROLS APPLICATIONS
Vehicle: 1994 Dodge Stealth R/T Sport 3.0 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Stealth BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Dodge Stealth cars and light trucks from 1990+.
Drum Brakes -> Type 2 & 3--Kelsey-Hayes & Varga Leading Trailing Drum Brakes -> Precautions
Vehicle: 1994 Dodge Stealth R/T Sport 3.0 V6 GAS
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust, as many manufacturers incorporate asbestos fibers in the production of brake linings. During routine service operations, the amount of asbestos dust from brake lining wear is at a low level due to a chemical breakdown during use. A few precautions will minimize exposure.
Do not sand or grind brake linings unless suitable local exhaust ventilation equipment is used to prevent excessive asbestos exposure.
- Wear a suitable respirator approved for asbestos dust use during all repair procedure...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Stealth BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Dodge Stealth cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> FLUID RESERVOIR -> Installation -> MASTER CYLINDER -> Removal -> TYPE 1 -> TYPE 2 -> TYPE 4 -> TYPE 5 -> TYPES 3, 5, 6 & 7 -> WHEEL CYLINDER
Vehicle: 1994 Dodge Stealth R/T Turbo 3.0 V6 GAS
MASTER CYLINDER
TYPE 1
- Place drain pan under the master cylinder.
- Using a suitable wrench, disconnect brake lines from the master cylinder. Plug all lines and fittings.
- Remove master cylinder-to-brake booster attaching nuts.
- Pull master cylinder outward and away from brake booster.
- Reverse procedure to install noting the following:
- Prior to installing a new or rebuilt master cylinder, it should be bench bled as described under "Brake System Bleed."
- Torque master cylinder-to-brake booster attaching nuts to 170-230 inch lbs.
- Torque brake line fittings to 170 inch lbs.
TYPE 2
Refer to Fig...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Stealth BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Dodge Stealth cars and light trucks from 1990+.
Disc Brakes -> Type 10-MR68X Dual Piston, Rigid Caliper Disc Brake, Rear -> Adjustments -> PARKING BRAKE LEVER -> PARKING BRAKE SHOE
Vehicle: 1994 Dodge Stealth R/T Turbo 3.0 V6 GAS
PARKING BRAKE LEVER
- Pull parking brake lever with a force of approximately 45 lbs. while counting number of clicks.
- Lever should click 3-5 times .
- If not within specifications, remove cup holder and plug, then turn adjusting nut located behind parking brake lever as necessary to bring parking brake within specifications.
PARKING BRAKE SHOE
If parking brake application is unbalanced or if repairs are made to parking brake system, shoe adjustment will be necessary
- Raise and support vehicle, then remove rear wheels.
- Disconnect drive axles from companion flange.
- ...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Stealth BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Dodge Stealth AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Dodge Stealth cars and light trucks from 1990+.
Disc Brakes -> Type 10-MR68X Dual Piston, Rigid Caliper Disc Brake, Rear -> Troubleshooting -> LATERAL RUNOUT CHECK
Vehicle: 1994 Dodge Stealth R/T Sport 3.0 V6 GAS
Refer to "Type 1-MR56W & MR57W Dual Piston Floating Caliper Disc Brake, Front" for system troubleshooting.
LATERAL RUNOUT CHECK
Refer to "Disc Brake Specifications" for runout specifications.
- Raise and support vehicle, then remove wheels.
- If applicable, ensure wheel bearings are properly adjusted.
- Using suitable spacers install lug nuts or bolts, then torque to specifications.
- Mount a dial indicator to a convenient part of the vehi...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Stealth BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
