1994 Ford Crown Victoria Driveline, U-Joint & CV Axles Replacement (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1994 Ford Crown Victoria car and truck repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1994 Ford Crown Victoria automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 1994 Ford Crown Victoria

  • 1994 Ford Crown Victoria 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
  • 1994 Ford Crown Victoria LX 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
  • 1994 Ford Crown Victoria S 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
  • 1994 Ford Crown Victoria Police Interceptor 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Ford Crown Victoria AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Ford Crown Victoria cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 1994 Ford Crown Victoria 4.6 V8 GAS

Disassemble

Do not clamp driveshaft in jaws of a vice or a similar holding fixture.

  • Place driveshaft on a suitable workbench.
  • Mark positions of driveshaft components relative to driveshaft tube. This ensures all components are reassembled in same relationship to maintain correct balance.
  • Index driveshaft and driveshaft components.
  • Clamp U-Joint Tool in a vise.
  • Remove snap rings.
  • If bearing cup cannot be pressed all way out, remove it with vise grips.
  • Remove driveshaft slip-yoke.
  • Position driveshaft in U-Joint Tool.
  • Press out a bearing cup.
  • Rotate driveshaft 180 degrees.
  • Press on...

CLICK HERE TO GET FULL ACCESS TO 1994 Ford Crown Victoria DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Ford Crown Victoria AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Ford Crown Victoria cars and light trucks from 1990+.

DRIVESHAFT, Replace
Vehicle: 1994 Ford Crown Victoria S 4.6 V8 GAS

  • Raise and support vehicle.
  • Index-mark driveshaft. Place a paint index-mark on pinion flange to driveshaft centering socket yoke.
  • Remove driveshaft-to-driveshaft pinion flange bolts.
  • Place a paint index-mark on driveshaft slip-yoke to transmissio...

CLICK HERE TO GET FULL ACCESS TO 1994 Ford Crown Victoria DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Ford Crown Victoria AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Ford Crown Victoria cars and light trucks from 1990+.

DRIVESHAFT, Replace
Vehicle: 1994 Ford Crown Victoria 4.6 V8 GAS

  • Raise and support vehicle.
  • Index-mark driveshaft. Place a paint index-mark on pinion flange to driveshaft centering socket yoke.
  • Remove driveshaft-to-driveshaft pinion flange bolts.
  • Place a paint index-mark on driveshaft slip-yoke to transmissio...

CLICK HERE TO GET FULL ACCESS TO 1994 Ford Crown Victoria DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Ford Crown Victoria AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Ford Crown Victoria cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 1994 Ford Crown Victoria S 4.6 V8 GAS

Disassemble

Do not clamp driveshaft in jaws of a vice or a similar holding fixture.

  • Place driveshaft on a suitable workbench.
  • Mark positions of driveshaft components relative to driveshaft tube. This ensures all components are reassembled in same relationship to maintain correct balance.
  • Index driveshaft and driveshaft components.
  • Clamp U-Joint Tool in a vise.
  • Remove snap rings.
  • If bearing cup cannot be pressed all way out, remove it with vise grips.
  • Remove driveshaft slip-yoke.
  • Position driveshaft in U-Joint Tool.
  • Press out a bearing cup.
  • Rotate driveshaft 180 degrees.
  • Press on...

CLICK HERE TO GET FULL ACCESS TO 1994 Ford Crown Victoria DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Ford Crown Victoria AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Ford Crown Victoria cars and light trucks from 1990+.

DRIVESHAFT, Replace
Vehicle: 1994 Ford Crown Victoria LX 4.6 V8 GAS

  • Raise and support vehicle.
  • Index-mark driveshaft. Place a paint index-mark on pinion flange to driveshaft centering socket yoke.
  • Remove driveshaft-to-driveshaft pinion flange bolts.
  • Place a paint index-mark on driveshaft slip-yoke to transmissio...

CLICK HERE TO GET FULL ACCESS TO 1994 Ford Crown Victoria DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Ford Crown Victoria AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Ford Crown Victoria cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 1994 Ford Crown Victoria LX 4.6 V8 GAS

Disassemble

Do not clamp driveshaft in jaws of a vice or a similar holding fixture.

  • Place driveshaft on a suitable workbench.
  • Mark positions of driveshaft components relative to driveshaft tube. This ensures all components are reassembled in same relationship to maintain correct balance.
  • Index driveshaft and driveshaft components.
  • Clamp U-Joint Tool in a vise.
  • Remove snap rings.
  • If bearing cup cannot be pressed all way out, remove it with vise grips.
  • Remove driveshaft slip-yoke.
  • Position driveshaft in U-Joint Tool.
  • Press out a bearing cup.
  • Rotate driveshaft 180 degrees.
  • Press on...

CLICK HERE TO GET FULL ACCESS TO 1994 Ford Crown Victoria DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1994 Ford Crown Victoria vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find