Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1994 KIA Sephia car and truck
repair procedures including KIA engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1994 KIA Sephia automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1994 KIA Sephia
- 1994 KIA Sephia GS 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:1
- 1994 KIA Sephia LS 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:1
- 1994 KIA Sephia RS 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:1
BRAKE SERVICE PROCEDURES FOR 1994 KIA Sephia AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 KIA Sephia cars and light trucks from 1990+.
Drum Brakes -> Inspection
Vehicle: 1994 KIA Sephia RS 1.6 L4 GAS
- Measure brake drum diameter. Maximum diameter is 7.91 inches on Sephia and...
CLICK HERE TO GET FULL ACCESS TO 1994 KIA Sephia BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 KIA Sephia AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 KIA Sephia cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder -> Sephia -> Sportage
Vehicle: 1994 KIA Sephia RS 1.6 L4 GAS
Master Cylinder
Sephia
- Remove master cylinder in numbered sequence shown in Fig. , noting the following:
- Disconnect brake pipe from master cylinder. Do not allow brake fluid to come in contact with painted surfaces.
- Reverse procedure to install. Add break fluid, bleed hydraulic system and inspect for fluid leaks.
Sportage
- Place cloth under master cylinder to prevent brake fluid from falling on painted surfaces.
- Disconnect clutch fluid hose from back of clutch master cylinder reservoir and drain reservoir.
- Disconnect fluid level and differential sensor connector.
- ...
CLICK HERE TO GET FULL ACCESS TO 1994 KIA Sephia BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 KIA Sephia AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 KIA Sephia cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> ABS Control Unit -> Brake System Bleed -> Component Replacement
Vehicle: 1994 KIA Sephia RS 1.6 L4 GAS
Brake System Bleed
Refer to "Hydraulic Brake System" for air bleeding procedure.
Component Replacement
ABS Control Unit
- Disconnect battery ground cable.
- Disconnect ABS control unit harness connector.
- Remove lower instru...
CLICK HERE TO GET FULL ACCESS TO 1994 KIA Sephia BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 KIA Sephia AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 KIA Sephia cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> Brake Pedal -> Sephia -> Sportage
Vehicle: 1994 KIA Sephia LS 1.6 L4 GAS
Brake Pedal
Sephia
- Distance from top center of brake pedal to floor mat should be 7.60-7.72 inches.
- Disconnect brake pedal switch connector (E), Fig. .
- Loosen locknuts (B) and turn switch (A) until it does not contact pedal.
- Loosen locknuts (D) and turn rod (C) to adjust height of brake pedal.
- Tighten brake pedal switch until plunger is completely compressed, then turn additional 1/2 turn and tighten locknuts.
- Verify operation of stoplights.
- Adjust pedal freeplay by loosening locknut (D...
CLICK HERE TO GET FULL ACCESS TO 1994 KIA Sephia BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 KIA Sephia AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 KIA Sephia cars and light trucks from 1990+.
Anti-lock Brakes -> Troubleshooting
Vehicle: 1994 KIA Sephia LS 1.6 L4 GAS
A system check of the rear wheel anti...
CLICK HERE TO GET FULL ACCESS TO 1994 KIA Sephia BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 KIA Sephia AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 KIA Sephia cars and light trucks from 1990+.
Anti-lock Brakes -> Description
Vehicle: 1994 KIA Sephia RS 1.6 L4 GAS
The Sportage is equipped with a rear wheel anti-lock brake system. The ABS control unit senses...
CLICK HERE TO GET FULL ACCESS TO 1994 KIA Sephia BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
