Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1994 Mercury Tracer car and truck
repair procedures including Mercury engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1994 Mercury Tracer automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1994 Mercury Tracer
- 1994 Mercury Tracer LTS 1.8 L4 GAS, CID:112, Fuel Injection, Aspiration:112, Engine VIN:, Desg:8
- 1994 Mercury Tracer Trio 1.9 L4 GAS, CID:116, Fuel Injection, Aspiration:116, Engine VIN:, Desg:J
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Mercury Tracer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Mercury Tracer cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1994 Mercury Tracer Trio 1.9 L4 GAS
If removing both right and left side halfshafts, appropriate plugs must be installed. Failure to do so may result in dislocation of differential side gears, necessitating transaxle disassembly to re-align gears.
- Raise and support vehicle.
- Remove wheel and splash shield.
- Raise staked portion of halfshaft retaining nut using suitable tool.
- Remove retaining nut and discard.
- Remove cotter pin from tie rod end and separate tie rod end from steering knuckle using a suitable tie rod remover tool.
- Remove lower ball joint clamp bolt and pry down on lower control arm to separate ball joi...
CLICK HERE TO GET FULL ACCESS TO 1994 Mercury Tracer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Mercury Tracer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Mercury Tracer cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1994 Mercury Tracer LTS 1.8 L4 GAS
If removing both right and left side halfshafts, appropriate plugs must be installed. Failure to do so may result in dislocation of differential side gears, necessitating transaxle disassembly to re-align gears.
- Raise and support vehicle.
- Remove wheel and splash shield.
- Raise staked portion of halfshaft retaining nut using suitable tool.
- Remove retaining nut and discard.
- Remove cotter pin from tie rod end and separate tie rod end from steering knuckle using a suitable tie rod remover tool.
- Remove lower ball joint clamp bolt and pry down on lower control arm to separate ball joi...
CLICK HERE TO GET FULL ACCESS TO 1994 Mercury Tracer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1994 Mercury Tracer vehicle.
|
| Access the Complete guide! |
