Auto Parts Search
We have info for following modifications of 1994 Suzuki Swift
- 1994 Suzuki Swift GA 1.3 L4 GAS, CC:1298, CID:79, Fuel Injection, Aspiration:79, Engine VIN:, Desg:3
- 1994 Suzuki Swift GS 1.3 L4 GAS, CC:1298, CID:79, Fuel Injection, Aspiration:79, Engine VIN:, Desg:3
- 1994 Suzuki Swift GT 1.3 L4 GAS, CC:1298, CID:79, Fuel Injection, Aspiration:79, Engine VIN:, Desg:3
- 1994 Suzuki Swift L 1.3 L4 GAS, CC:1298, CID:79, Fuel Injection, Aspiration:79, Engine VIN:, Desg:3
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Suzuki Swift AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Suzuki Swift cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> DOUBLE OFFSET JOINT (DOJ) TYPE -> LH Side Shaft -> RH Side Shaft -> TRIPOD JOINT TYPE
Vehicle: 1994 Suzuki Swift GS 1.3 L4 GAS
DOUBLE OFFSET JOINT (DOJ) TYPE
This type of front driveshaft is used for manual transaxle models.
LH Side Shaft
- Raise and support vehicle.
- Remove tires and wheels.
- Remove staking and driveshaft nut and washer.
- Drain transaxle oil into appropriate container.
- Using large size screwdrivers, pull out driveshaft joint. This will release snap ring fitting of joint spline at differential side, Fig. .
- Disconnect stabilizer joint from suspension arm.
- Remove ball stud bolt and nut, then separate suspension arm from knuckle.
- Remove driveshaft assembly.
- Reverse procedure to install, noting the ...
CLICK HERE TO GET FULL ACCESS TO 1994 Suzuki Swift DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Suzuki Swift AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Suzuki Swift cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> DOUBLE OFFSET JOINT (DOJ) TYPE -> LH Side Shaft -> RH Side Shaft -> TRIPOD JOINT TYPE
Vehicle: 1994 Suzuki Swift L 1.3 L4 GAS
DOUBLE OFFSET JOINT (DOJ) TYPE
This type of front driveshaft is used for manual transaxle models.
LH Side Shaft
- Raise and support vehicle.
- Remove tires and wheels.
- Remove staking and driveshaft nut and washer.
- Drain transaxle oil into appropriate container.
- Using large size screwdrivers, pull out driveshaft joint. This will release snap ring fitting of joint spline at differential side, Fig. .
- Disconnect stabilizer joint from suspension arm.
- Remove ball stud bolt and nut, then separate suspension arm from knuckle.
- Remove driveshaft assembly.
- Reverse procedure to install, noting the ...
CLICK HERE TO GET FULL ACCESS TO 1994 Suzuki Swift DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Suzuki Swift AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Suzuki Swift cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> DOUBLE OFFSET JOINT (DOJ) TYPE -> LH Side Shaft -> RH Side Shaft -> TRIPOD JOINT TYPE
Vehicle: 1994 Suzuki Swift GA 1.3 L4 GAS
DOUBLE OFFSET JOINT (DOJ) TYPE
This type of front driveshaft is used for manual transaxle models.
LH Side Shaft
- Raise and support vehicle.
- Remove tires and wheels.
- Remove staking and driveshaft nut and washer.
- Drain transaxle oil into appropriate container.
- Using large size screwdrivers, pull out driveshaft joint. This will release snap ring fitting of joint spline at differential side, Fig. .
- Disconnect stabilizer joint from suspension arm.
- Remove ball stud bolt and nut, then separate suspension arm from knuckle.
- Remove driveshaft assembly.
- Reverse procedure to install, noting the ...
CLICK HERE TO GET FULL ACCESS TO 1994 Suzuki Swift DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Suzuki Swift AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Suzuki Swift cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> DOUBLE OFFSET JOINT (DOJ) TYPE -> LH Side Shaft -> RH Side Shaft -> TRIPOD JOINT TYPE
Vehicle: 1994 Suzuki Swift GT 1.3 L4 GAS
DOUBLE OFFSET JOINT (DOJ) TYPE
This type of front driveshaft is used for manual transaxle models.
LH Side Shaft
- Raise and support vehicle.
- Remove tires and wheels.
- Remove staking and driveshaft nut and washer.
- Drain transaxle oil into appropriate container.
- Using large size screwdrivers, pull out driveshaft joint. This will release snap ring fitting of joint spline at differential side, Fig. .
- Disconnect stabilizer joint from suspension arm.
- Remove ball stud bolt and nut, then separate suspension arm from knuckle.
- Remove driveshaft assembly.
- Reverse procedure to install, noting the ...
CLICK HERE TO GET FULL ACCESS TO 1994 Suzuki Swift DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1994 Suzuki Swift vehicle. |
Access the Complete guide! |