Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1995 BMW 325IS car and truck
repair procedures including BMW engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1995 BMW 325IS automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1995 BMW 325IS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 BMW 325IS cars and light trucks from 1990+.
Hydraulic Brake Systems -> Troubleshooting
Vehicle: 1995 BMW 325IS 2.5 L6 GAS
Refer to Fig. for hy...
CLICK HERE TO GET FULL ACCESS TO 1995 BMW 325IS BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 BMW 325IS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 BMW 325IS cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Master Cylinder
Vehicle: 1995 BMW 325IS 2.5 L6 GAS
Master Cylinder
Operating the brake pedal moves pistons (1 and 4) forward, Fig. . Primary cups (2 and 5) slide over compensation bores (3 and 6), which creates balanced pressure in chambers A and B.
Chamber A acts on front right and rear left brakes. Chamber B serves left front and right rear brakes. If brake circuit fails, the brake pedal travel will increase considerably.
If se...
CLICK HERE TO GET FULL ACCESS TO 1995 BMW 325IS BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 BMW 325IS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 BMW 325IS cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Disassemble -> Front -> Inspection -> Overhaul -> Rear -> Replace
Vehicle: 1995 BMW 325IS 2.5 L6 GAS
Replace
Front
- Raise and support vehicle, then remove front tire and wheel.
- Drain moderate amount of brake fluid from reservoir using suitable syringe.
- Disconnect caliper brake hose.
- Remove caliper bolts and disconnect brake pad wear sensor electrical connector.
- Remove caliper toward rear.
- Reverse procedure to install, noting the following:
- Tighten mounting bolts to specifications.
- Bleed brake system.
- Ensure brake pad wear sensor wire does not contact rotor or wheel.
Rear
- Raise and support vehicle, then remove rear tire and wheel assembly.
- Drain moderate amount of brake fluid from reservoir u...
CLICK HERE TO GET FULL ACCESS TO 1995 BMW 325IS BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 BMW 325IS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 BMW 325IS cars and light trucks from 1990+.
Hydraulic Brake Systems -> Precautions -> Battery Ground Cable
Vehicle: 1995 BMW 325IS 2.5 L6 GAS
Battery Ground Cable
Prior to service, dis...
CLICK HERE TO GET FULL ACCESS TO 1995 BMW 325IS BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 BMW 325IS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 BMW 325IS cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> Brake System Bleed -> Component Replacement -> Control Unit, Replace -> Front Speed Sensor, Replace -> Hydraulic Unit, Replace -> Rear Speed Sensor, Replace
Vehicle: 1995 BMW 325IS 2.5 L6 GAS
Brake System Bleed
Refer to "Hydraulic Brake Systems," for procedures.
Component Replacement
Hydraulic Unit, Replace
- Remove coolant expansion tank.
- Remove brake lines from hydraulic unit as follows: front left; front right; rear left; rear right.
- Remove brake hydraulic lines from master cylinder to hydraulic unit.
- Remove hydraulic cover, then loosen, but do not remove, unit mounting bolts.
- Remove mounting screws, then disconnect multiple pin connector and ground wire.
- Remove hydraulic unit by pulling front up and disconnecting rear.
- Reverse procedure to install. Ensuring hydraulic lines are ...
CLICK HERE TO GET FULL ACCESS TO 1995 BMW 325IS BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 BMW 325IS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 BMW 325IS cars and light trucks from 1990+.
Disc Brakes -> Rotor Replacement
Vehicle: 1995 BMW 325IS 2.5 L6 GAS
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove brake pads as previously described.
- Remove caliper mounting bolts, then position caliper aside with brake hoses connected.
- Remove screw mount...
CLICK HERE TO GET FULL ACCESS TO 1995 BMW 325IS BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1995 BMW 325IS vehicle.
|
| Access the Complete guide! |
