Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1995 Dodge Dakota car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1995 Dodge Dakota automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1995 Dodge Dakota
- 1995 Dodge Dakota 3.9 V6 GAS, CID:239, Fuel Injection, Aspiration:239, Engine VIN:, Desg:X
- 1995 Dodge Dakota 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
- 1995 Dodge Dakota 5.2 V8 CNG, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:T
- 1995 Dodge Dakota 2.5 L4 GAS, CC:2507, CID:153, Fuel Injection, Aspiration:153, Engine VIN:, Desg:G
BRAKE SERVICE PROCEDURES FOR 1995 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Dodge Dakota cars and light trucks from 1990+.
Anti-lock Brakes -> Dakota, Full Size Pickups & Vans & Ramcharger -> Troubleshooting -> Four Wheel Anti-Lock Brake System -> Rear Wheel Anti-Lock (RWAL) Brake System
Vehicle: 1995 Dodge Dakota 3.9 V6 GAS
Rear Wheel Anti-Lock (RWAL) Brake System
Refer to "Wiring Diagrams" in "Vehicle Systems" to aid diagnosis
RWAL system malfunctions are indicated by a warning lamp on the instrument cluster. If such a malfunction occurs, proceed as follows:
- Inspect brake fluid level and correct as necessary.
- Visually inspect ABS hydraulic and electrical connections and correct as necessary.
- If hydraulic system leaks or weak or corroded electrical connections are not evident, road test vehicle to inspect vehicle for driveability conditions such as low or spongy pedal, brake pulling or grabbing.
- Ensure parki...
CLICK HERE TO GET FULL ACCESS TO 1995 Dodge Dakota BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Dodge Dakota cars and light trucks from 1990+.
Disc Brakes -> Dakota -> Brake Pad Service -> 2WD Models -> 4WD Models -> Installation -> Removal
Vehicle: 1995 Dodge Dakota 5.2 V8 CNG
Removal
2WD Models
- Clean master cylinder reservoir and filler caps, then remove caps and drain approximately 1/4 of fluid from reservoir using a suitable suction tool.
- Raise and support vehicle, then remove front wheel and outboard pad hold down spring, Fig. .
- Using a large C-clamp, bottom caliper piston by tightening clamp screw on outboard brake pad. Ensure rear of clamp is positioned on rear of caliper body.
- Remove caliper slide pins, then lift caliper and brake pads out of adapter and off rotor surface. It is not necessary to disconnect caliper hydraulic line; however, caliper ...
CLICK HERE TO GET FULL ACCESS TO 1995 Dodge Dakota BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Dodge Dakota cars and light trucks from 1990+.
Power Brake Units -> Description
Vehicle: 1995 Dodge Dakota 3.9 V6 GAS
These self contained vacuum hydraulic power braking units are of the vacuum suspended type. They use engine intake manifold vacuum or a vacuum pump, along with atmospheric pressure, for their power, eliminating the need for a vacuum reservoir. A mechanically operated control valve, with integral vacuum power diaphragms, controls degree of brake application or release depending on amount of foot pressure applied t...
CLICK HERE TO GET FULL ACCESS TO 1995 Dodge Dakota BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Dodge Dakota cars and light trucks from 1990+.
Disc Brakes -> Dakota -> Caliper Service -> Assemble -> Disassemble -> Installation -> Removal
Vehicle: 1995 Dodge Dakota 5.2 V8 GAS
Removal
- Raise vehicle, then remove front wheel.
- On 2WD models, remove outboard brake pad hold down spring, Fig. .
- On all models, disconnect brake hose at caliper and discard fitting washers if worn or damaged.
- Remove caliper slide pins, then lift caliper and brake pads off rotor.
- If necessary, remove brake pads from caliper as outlined under "Brake Pad Service."
Disassemble
- Clean outside of caliper with suitable solvent.
- Drain fluid from caliper and place clean shop cloths in caliper opposite piston.
- Slowly apply compressed air to caliper inlet port until piston moves out of bore. Do not "b... "
CLICK HERE TO GET FULL ACCESS TO 1995 Dodge Dakota BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Dodge Dakota cars and light trucks from 1990+.
Disc Brakes -> Dakota -> Brake Pad Service -> 2WD Models -> 4WD Models -> Installation -> Removal
Vehicle: 1995 Dodge Dakota 5.2 V8 GAS
Removal
2WD Models
- Clean master cylinder reservoir and filler caps, then remove caps and drain approximately 1/4 of fluid from reservoir using a suitable suction tool.
- Raise and support vehicle, then remove front wheel and outboard pad hold down spring, Fig. .
- Using a large C-clamp, bottom caliper piston by tightening clamp screw on outboard brake pad. Ensure rear of clamp is positioned on rear of caliper body.
- Remove caliper slide pins, then lift caliper and brake pads out of adapter and off rotor surface. It is not necessary to disconnect caliper hydraulic line; however, caliper ...
CLICK HERE TO GET FULL ACCESS TO 1995 Dodge Dakota BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Dodge Dakota AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Dodge Dakota cars and light trucks from 1990+.
Anti-lock Brakes -> Dakota, Full Size Pickups & Vans & Ramcharger -> Diagnosis & Testing -> 1992-95 -> 1996 -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Trouble Code Interpretation -> Four Wheel Anti-Lock Brake System -> Rear Wheel Anti-Lock (RWAL) Brake System
Vehicle: 1995 Dodge Dakota 3.9 V6 GAS
Accessing Diagnostic Trouble Codes
Rear Wheel Anti-Lock (RWAL) Brake System
1992-95
To read diagnostic trouble codes, momentarily ground the diagnostic connector and count the number of flashes of the anti-lock indicator lamp. One long flash will indicate the beginning of the diagnostic trouble code number sequence, followed by short flashes as a continuation of the diagnostic trouble code. The long flash and short flashes must be counted together to determine a stored diagnostic trouble code. Note the following:
- On Dakota models, the diagnostic connector is located on the passe...
CLICK HERE TO GET FULL ACCESS TO 1995 Dodge Dakota BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1995 Dodge Dakota vehicle.
|
| Access the Complete guide! |
