Auto Parts Search

BRAKE SERVICE PROCEDURES FOR 1995 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC Jimmy cars and light trucks from 1990+.
Anti-lock Brakes -> Rear Wheel Anti-Lock Brake System -> Description -> 1992 -> 1993 S & T Series -> 1993-94 C & K Series & 1994-95 S & T Series
Vehicle: 1995 GMC Jimmy 4.3 V6 GAS
1992
The Rear Wheel Anti-Lock (RWAL) system, Fig. , reduces the occurrence of rear wheel lockup during severe braking by regulating rear hydraulic line pressure. Pressure applied to the rear wheel brakes is regulated by a control valve assembly located under the master cylinder. The control valve consists of a dump valve which releases hydraulic pressure into an accumulator, and an isolation valve which holds rear brake pressure. Operation of the dump valve and isolation valve is controlled by an Electronic Control Unit (ECU) which is mounted next to the master cylinder.
The ECU rec...
CLICK HERE TO GET FULL ACCESS TO 1995 GMC Jimmy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC Jimmy cars and light trucks from 1990+.
Anti-lock Brakes -> ABS-VI Anti-Lock Brake System -> Diagnostic Chart Index
Vehicle: 1995 GMC Jimmy 4.3 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1995 GMC Jimmy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC Jimmy cars and light trucks from 1990+.
Disc Brakes -> Bendix Single Piston Sliding Caliper -> Caliper Service -> Assemble -> Disassemble -> Inspection -> Installation -> Removal
Vehicle: 1995 GMC Jimmy 4.3 V6 GAS
Removal
- Siphon 2/3 of brake fluid from master cylinder reservoir serving front disc brakes.
- Raise vehicle, support on jack stands and remove front wheels.
- Bottom caliper piston in bore. Insert a screwdriver between inboard shoe and piston, then pry piston back into bore. The piston can also be bottomed in the bore with a large C-clamp, Fig. .
- Remove support key retaining screw.
- Drive caliper support key and spring from steering knuckle with a suitable drift and hammer, Fig. .
- Lift caliper from anchor plate and off rotor, Fig. . Hang caliper from coil spring with wire. Do not allow cal...
CLICK HERE TO GET FULL ACCESS TO 1995 GMC Jimmy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC Jimmy cars and light trucks from 1990+.
Disc Brakes -> Bendix Single Piston Sliding Caliper -> Description
Vehicle: 1995 GMC Jimmy 4.3 V6 GAS
The Bendix single piston sliding caliper disc brake is standard equipment on some truck applications, while on other trucks it is used only in Hydro-Boost power brake applications with both front disc brakes and 4 wheel disc brakes. On 4 wheel disc brakes, the front and rear systems are identical.
T...
CLICK HERE TO GET FULL ACCESS TO 1995 GMC Jimmy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC Jimmy cars and light trucks from 1990+.
Power Brake Units -> Delco-Moraine Brake Boosters -> POWER BRAKE UNIT REPLACEMENT -> Astro & Safari -> C & K Series -> Full Size Except C & K Series -> Lumina APV, Silhouette & Trans Sport -> S/T Series & Bravada
Vehicle: 1995 GMC Jimmy 4.3 V6 GAS
Astro & Safari
- Disconnect master cylinder from power brake unit.
- Disconnect power brake unit pushrod from brake pedal.
- Remove power brake unit retaining nuts and the power brake unit.
- Reverse procedure to install.
Full Size Except C & K Series
- Remove master cylinder attaching nuts and position master cylinder aside. Do not disconnect brake lines from cylinder.
- Disconnect power brake unit pushrod from brake pedal.
- Remove attaching nuts, then the power brake unit.
- Reverse procedure to install.
S/T Series & Bravada
- Disconnect master cylinder assembly and vacuum hose from power br...
CLICK HERE TO GET FULL ACCESS TO 1995 GMC Jimmy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC Jimmy cars and light trucks from 1990+.
Anti-lock Brakes -> ABS-VI Anti-Lock Brake System -> Troubleshooting
Vehicle: 1995 GMC Jimmy 4.3 V6 GAS
Refer to ABS wiring diagrams and connector terminal identification, Figs. through , as aids when performing a visual inspection of anti-lock...
CLICK HERE TO GET FULL ACCESS TO 1995 GMC Jimmy BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |