Auto Parts Search

We have info for following modifications of 1995 GMC P35/P3500 VAN
- 1995 GMC P35/P3500 VAN 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:Z
- 1995 GMC P35/P3500 VAN 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:K
- 1995 GMC P35/P3500 VAN 7.4 V8 GAS, CID:454, Fuel Injection, Aspiration:454, Engine VIN:, Desg:N
- 1995 GMC P35/P3500 VAN 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:Y
BRAKE SERVICE PROCEDURES FOR 1995 GMC P35/P3500 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC P35/P3500 VAN cars and light trucks from 1990+.
Drum Brakes -> Precautions
Vehicle: 1995 GMC P35/P3500 VAN 5.7 V8 GAS
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust, as many manufacturers incorporate asbestos fibers in the production of brake linings. During routine service operations, the amount of asbestos dust from brake lining wear is at a low level due to a chemical breakdown during use, and a few precautions will minimize exposure. Do not sand or grind brake linings unless suitable local exhaust ventilation equipment is used to prevent exces...
CLICK HERE TO GET FULL ACCESS TO 1995 GMC P35/P3500 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 GMC P35/P3500 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC P35/P3500 VAN cars and light trucks from 1990+.
Disc Brakes -> Delco-Moraine Single Piston Caliper -> Precautions -> Brake Disc Service -> Brake Lines & Linings -> Brake Roughness -> General
Vehicle: 1995 GMC P35/P3500 VAN 4.3 V6 GAS
Brake Lines & Linings
Remove one of the front wheels and inspect the brake disc, caliper and linings.
Do not allow any oil or grease on the linings. It is recommended that all linings be replaced in sets when worn or damaged.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
Brake Roughness
The most common cause of brake chatter on disc brakes is a variation in thickness of the disc. If roughness or vibration is encountered during highway operation or if pedal pumping is experienced at low speeds, the disc may have excessive thickne...
CLICK HERE TO GET FULL ACCESS TO 1995 GMC P35/P3500 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 GMC P35/P3500 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC P35/P3500 VAN cars and light trucks from 1990+.
Drum Brakes -> Tightening Specifications
Vehicle: 1995 GMC P35/P3500 VAN 7.4 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 1995 GMC P35/P3500 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 GMC P35/P3500 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC P35/P3500 VAN cars and light trucks from 1990+.
Disc Brakes -> Delco-Moraine Single Piston Caliper -> Troubleshooting -> Brake Rattle -> Brake Roughness Or Chatter; Pedal Pumping -> Caliper Brake Fluid Leak -> Excessive Pedal Effort -> Excessive Pedal Travel -> Heavy Brake Drag -> No Braking Effect When Brake Pedal Is Depressed -> Pull, Uneven Or Grabbing Brakes -> Rear Brakes Locking On Application
Vehicle: 1995 GMC P35/P3500 VAN 6.5 V8 DIESEL
Excessive Pedal Travel
- Worn brake linings.
- Disc pads knock back after cornering or rough road travel.
- Piston and linings not properly seated or positioned.
- Insufficient fluid in system.
- Loose wheel bearing adjustment.
- Damaged or worn caliper piston seal.
- Improper booster pushrod adjustment.
- Pads out of flat more than .005 inch.
- Rear brake automatic adjusters inoperative.
- Improperly ground rear brake shoes.
Brake Roughness Or Chatter; Pedal Pumping
- Excessive lateral runout of rotor.
- Rotor excessively out of parallel.
Excessive Pedal Effort
- Frozen or seized pistons.
- Brake fluid, oil or grease on ...
CLICK HERE TO GET FULL ACCESS TO 1995 GMC P35/P3500 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 GMC P35/P3500 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC P35/P3500 VAN cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Hydraulic System Flush -> Manual Bleed -> Master Cylinder Bleed -> Parking Brake Bleed -> Pressure Bleed
Vehicle: 1995 GMC P35/P3500 VAN 7.4 V8 GAS
Manual Bleed
- If vehicle is equipped with power brakes, remove vacuum reserve by applying brakes several times with engine off.
- Fill master cylinder reservoirs with suitable brake fluid. Be sure to always keep master cylinder reservoirs at least half full during entire bleeding procedure.
- If master cylinder is suspected to have air in the bore, it must be bled first, as follows:
- Disconnect forward brake pipe connection at master cylinder.
- Allow brake fluid to fill master cylinder bore until it begins to flow from forward pipe connector port.
- Connect and tighten forward brake pipe at...
CLICK HERE TO GET FULL ACCESS TO 1995 GMC P35/P3500 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 GMC P35/P3500 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 GMC P35/P3500 VAN cars and light trucks from 1990+.
Power Brake Units -> Bendix Brake Boosters -> Power Brake Unit Replacement -> Astro & Safari -> C & K Series -> Full Size Except C & K Series
Vehicle: 1995 GMC P35/P3500 VAN 4.3 V6 GAS
Astro & Safari
For power brake unit replacement procedures, refer to "Delco Moraine Brake Boosters."
Full Size Except C & K Series
Before disconnecting lines from power unit, depress and release brake pedal several times to allow pressure to discharge from accumulator.
- On P30 motor home, raise and support vehicle.
- On all models, remove master cylinder to power brake unit attaching nuts, then position master cylinder aside. Do not disconnect brake lines from master cylinder.
- Disconnect hydraulic lines from power brake unit. Plug all lines and ports to prevent fluid loss and ...
CLICK HERE TO GET FULL ACCESS TO 1995 GMC P35/P3500 VAN BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |