Auto Parts Search
We have info for following modifications of 1995 Hyundai Accent
- 1995 Hyundai Accent 1.5 L4 GAS, CC:1495, Fuel Injection, Engine VIN:, Desg:N
- 1995 Hyundai Accent GL 1.5 L4 GAS, CC:1495, Fuel Injection, Engine VIN:, Desg:N
- 1995 Hyundai Accent L 1.5 L4 GAS, CC:1495, Fuel Injection, Engine VIN:, Desg:N
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 Hyundai Accent AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 Hyundai Accent cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1995 Hyundai Accent GL 1.5 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove dust cover, cotter pin and driveshaft nut.
- Drain transmission oil.
- Disconnect lower arm ball joint from knuckle, then remove stabilizer and strut bars from lower arm.
- On models with driveshaft center bearing , remove bearing bracket attaching bolts.
- Insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal.
- Using tool No. MB990767, or equivalent, remove drivesh...
CLICK HERE TO GET FULL ACCESS TO 1995 Hyundai Accent DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 Hyundai Accent AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 Hyundai Accent cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1995 Hyundai Accent 1.5 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove dust cover, cotter pin and driveshaft nut.
- Drain transmission oil.
- Disconnect lower arm ball joint from knuckle, then remove stabilizer and strut bars from lower arm.
- On models with driveshaft center bearing , remove bearing bracket attaching bolts.
- Insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal.
- Using tool No. MB990767, or equivalent, remove drivesh...
CLICK HERE TO GET FULL ACCESS TO 1995 Hyundai Accent DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 Hyundai Accent AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 Hyundai Accent cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1995 Hyundai Accent L 1.5 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove dust cover, cotter pin and driveshaft nut.
- Drain transmission oil.
- Disconnect lower arm ball joint from knuckle, then remove stabilizer and strut bars from lower arm.
- On models with driveshaft center bearing , remove bearing bracket attaching bolts.
- Insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal.
- Using tool No. MB990767, or equivalent, remove drivesh...
CLICK HERE TO GET FULL ACCESS TO 1995 Hyundai Accent DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1995 Hyundai Accent vehicle. |
Access the Complete guide! |