Auto Parts Search
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Chrysler LHS AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Chrysler LHS cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Traction Control System (TCS) Warning Lamp ->
Vehicle: 1996 Chrysler LHS 3.5 V6 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the warni...
CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler LHS MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Chrysler LHS AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Chrysler LHS cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Overhead Travel Information System (OTIS) -> Concorde, Intrepid, LHS, New Yorker, Vision & 300M -> Compass Calibration
Vehicle: 1996 Chrysler LHS 3.5 V6 GAS
Overhead Travel Information System (OTIS) is a module with six informational displays and four buttons, Fig. . When the ignition is turned ON, OTIS blanks the display for one second, then returns to the display active when the vehicle was last turned OFF.
LOW OIL PRESSURE--This message will be displayed when a low engine oil pressure condition exists. If message is encountered with vehicle operating at idle speed, increase engine RPM. If message remains or if message is encountered while operating vehicle, the engine lubricating system should be...
CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler LHS MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Chrysler LHS AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Chrysler LHS cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Power Loss/Limit Lamp -> Chrysler, Dodge & Plymouth
Vehicle: 1996 Chrysler LHS 3.5 V6 GAS
The Power Loss/Limit lamp should light for approximately 3 seconds after the ignition has been turned On as a bulb inspection. If improper or no signals are received by the logic module from various sensors, the logic modul...
CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler LHS MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Chrysler LHS AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Chrysler LHS cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Compass & Temperature Mini Trip Computer -> Concorde, Intrepid, LHS, New Yorker, Vision & 300M -> Compass Calibration -> Variance Setting
Vehicle: 1996 Chrysler LHS 3.5 V6 GAS
Compass Calibration
- Place the ignition switch in the On position, then set mini trip computer to Compass/Temp mode, Fig. .
- Press and hold the RESET button until CAL is displayed.
- Drive the vehicle in one complete circle at a speed of 3-5 mph. This should be done on a level surface free of large metal objects such as other vehicles, bridges, buildings, railroads and underground cables.
- When the CAL indicator turns Off, the compass has been calibrated and should now display proper headings.
- Inspect for proper calibrations...
CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler LHS MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Chrysler LHS AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Chrysler LHS cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Check Engine Lamp -> Acclaim, Concord, Daytona, Dynasty, Imperial, Intrepid, LeBaron, LHS, New Yorker, Shadow, Spirit, Sundance, Vision & Viper
Vehicle: 1996 Chrysler LHS 3.5 V6 GAS
On models less OBD II, the Check Engine lamp should light for approximately 3 seconds after the ignition has been turned On as a bulb inspection. If improper or no signals are received by the Powertrain Control Module (PCM) from various sensors and monitored systems or if the PCM enters its Limp-In mode, the PCM will light the Check Engine lamp. After diagnosing and servicing the vehicle, the PCM memory will be cleared after approximately 40 to 100 ignition key On-Off cycle...
CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler LHS MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Chrysler LHS AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Chrysler LHS cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Low Coolant Warning Lamp ->
Vehicle: 1996 Chrysler LHS 3.5 V6 GAS
The Low Coolant warning lamp should light whenever coolant level in the coolant reservoir is ...
CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler LHS MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Chrysler LHS vehicle. |
Access the Complete guide! |