Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Dodge Stratus car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1996 Dodge Stratus automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1996 Dodge Stratus
- 1996 Dodge Stratus 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:X
- 1996 Dodge Stratus 2.0 L4 GAS, CC:1996, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
- 1996 Dodge Stratus ES 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:X
- 1996 Dodge Stratus ES 2.5 V6 GAS, CC:2497, CID:152, Fuel Injection, Aspiration:152, Engine VIN:, Desg:H
- 1996 Dodge Stratus ES 2.0 L4 GAS, CC:1996, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
BRAKE SERVICE PROCEDURES FOR 1996 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Dodge Stratus cars and light trucks from 1990+.
Drum Brakes -> Type 1-Kelsey-Hayes & Varga Leading-Trailing Drum Brakes -> Adjustments -> Parking Brake -> Service Brake
Vehicle: 1996 Dodge Stratus 2.4 L4 GAS
Service Brake
- Each backing plate has two adjusting hole covers; remove the rear cover and turn the adjusting screw upward with a screwdriver or other suitable tool to expand the shoes until a slight drag is felt when the drum is rotated.
- While holding the adjustment lever out of engagement with the adjusting screw, back off the adjusting screw until wheel rotates freely with no drag.
- Install wheel and adjusting hole cover. Adjust brakes on remaining wheel in the same manner.
- If pedal height is not satisfactory, drive the vehicle and perfo...
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Stratus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Dodge Stratus cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> Avenger, Colt, Colt Vista, Sebring, Summit, Summit Wagon & Talon -> Pushrod Adjustment
Vehicle: 1996 Dodge Stratus 2.4 L4 GAS
Pushrod Adjustment
In some cases adjustment of the brake booster pushrod is necessary to ensure proper operation of the power brake system. A pushrod that is too long will cause the master cylinder piston to close off the compensating port, preventing hydraulic pressure from being released and resulting in brake drag. A pushrod that is too short will cause excessive brake pedal travel and cause groaning noises to come from the booster when the...
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Stratus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Dodge Stratus cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Bench Bleed -> Manual Bleed -> Master Cylinder Bleed -> On-Vehicle Service -> Precautions -> Pressure Bleed
Vehicle: 1996 Dodge Stratus 2.4 L4 GAS
Bleeding the hydraulic brake system is necessary if air has entered the system. A few causes for this condition are low fluid level, a hydraulic fluid leak, a hydraulic line is opened, or replacement of a hydraulic system component. Symptoms can be noted by an improper or loss of brake operation, and/or a low or spongy brake pedal.
Flushing the hydraulic brake system is necessary if contaminants are found in the hydraulic system. A few causes for hydraulic system contamination are moisture, age of hydraulic system parts and fluid, or improper fluid used in the system. Symptoms...
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Stratus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Dodge Stratus cars and light trucks from 1990+.
Drum Brakes -> Type 1-Kelsey-Hayes & Varga Leading-Trailing Drum Brakes -> Inspection -> Adjuster Mechanism -> Backing Plate -> Brake Drums -> Brake Linings & Springs -> Parking Brake Cable
Vehicle: 1996 Dodge Stratus ES 2.0 L4 GAS
Brake Drums
Any time the brake drums are removed for brake service, the braking surface diameter should be inspected with a suitable brake drum micrometer at several points to determine if they are within the safe oversize limit stamped on the brake drum outer surface. If the braking surface diameter exceeds specifications, the drum must be replaced. If the braking surface diameter is within specifications, drums should be cleaned and inspected for cracks, scores, deep grooves, taper, out of round and heat spotting. If drums are cracked or heat spotted, they must be replaced. Scoring ...
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Stratus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Dodge Stratus cars and light trucks from 1990+.
Disc Brakes -> Type 5-Allied Signal Dual Pin Floating Caliper Disc Brake, Front -> Brake System Bleed -> Manual Bleed -> Pressure Bleed
Vehicle: 1996 Dodge Stratus ES 2.0 L4 GAS
Bleeding the hydraulic brake system is necessary if air has entered the system. Symptoms can be noted by loss of brake operation, and/or a low or spongy brake pedal.
The hydraulic fluid is bled or flushed from the system through bleeder valves located on the calipers, wheel cylinders, and some master cylinders. Use only specified brake fluid when bleeding the hydraulic brake system. Never reuse old brake fluid removed from the system.
Pressure Bleed
Pressure bleeding is recommended for all hydraulic brake systems. It is the fastest method because the master cylinder is automatic...
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Stratus BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Dodge Stratus AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Dodge Stratus cars and light trucks from 1990+.
Hydraulic Brake Systems -> Hydraulic Brake System Specifications
Vehicle: 1996 Dodge Stratus ES 2.0 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Stratus BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1996 Dodge Stratus vehicle.
|
| Access the Complete guide! |
