Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Isuzu Hombre car and truck
repair procedures including Isuzu engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1996 Isuzu Hombre automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1996 Isuzu Hombre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Isuzu Hombre cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> Amigo, Pickup & Rodeo -> Amigo, Pickup, Rodeo & Trooper w/Rear Wheel ABS -> Amigo, Pickup, Rodeo & Trooper w/Rear Wheel ABS (RWAL) -> Brake System Bleed -> Component Replacement -> Electronic Brake Control Module (EBCM) -> Electronic Control Module (ECM) -> Front Speed Sensor -> G-Sensor -> Hydraulic Unit -> Isolation/Dump Valve -> Rear Speed Sensor -> Speed Sensor -> Trooper w/Four Wheel ABS -> Trooper w/Rear Wheel ABS
Vehicle: 1996 Isuzu Hombre 2.2 L4 GAS
Brake System Bleed
Refer to "Hydraulic Brake System" for brake bleeding procedure.
Component Replacement
These components are non-serviceable and must be replaced as a unit, do not try to disassemble components.
Hydraulic Unit
Trooper w/Four Wheel ABS
- Disconnect electrical connectors from unit.
- Remove upper battery hold-down bracket.
- Disconnect brake lines from unit, then cap ends to prevent entry of foreign material.
- Disconnect hydraulic unit ground lead, then remove front retaining bracket.
- Remove nuts retaining unit, then hydraulic unit from vehicle.
- Reverse procedure to install, noting th...
CLICK HERE TO GET FULL ACCESS TO 1996 Isuzu Hombre BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Isuzu Hombre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Isuzu Hombre cars and light trucks from 1990+.
Power Brake Units -> Description -> Single Vacuum Unit -> Tandem Vacuum Unit
Vehicle: 1996 Isuzu Hombre 2.2 L4 GAS
Single Vacuum Unit
In a normal operating mode, with the service brakes in the released position, the single vacuum booster operates with vacuum on one side of the diaphragm. When the brakes are applied, air at atmospheric pressure is admitted to one side of the diaphragm to provide the power assist. When the service brake is released, the atmospheric pressure is cut off from the one side of t...
CLICK HERE TO GET FULL ACCESS TO 1996 Isuzu Hombre BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Isuzu Hombre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Isuzu Hombre cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> Amigo & Pickup -> Brake Booster Pushrod -> Rodeo -> Trooper
Vehicle: 1996 Isuzu Hombre 2.2 L4 GAS
Brake Booster Pushrod
Amigo & Pickup
- Apply 19.7 inches of Hg negative pressure to vacuum servo.
- Measure pushrod length from tip to face, Fig. . Length should be .717 inch.
- Ensure brake pedal spring will fully return brake pedal and measure pedal height.
- Pedal height is taken from the bare floor, carpeting and mat removed, to the face of the rubber brake pedal cover.
- Pedal height must be measured after starting and revving engine several times.
- Pedal height should be 6.85-7.24 inches when fully released and 3.7 inches when a force of 110 lbs. has been applied to brake pedal.
- Pedal free play ...
CLICK HERE TO GET FULL ACCESS TO 1996 Isuzu Hombre BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Isuzu Hombre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Isuzu Hombre cars and light trucks from 1990+.
Anti-lock Brakes -> Description -> Amigo, Pickup, Rodeo & Trooper w/Rear Wheel ABS -> Trooper w/Four Wheel ABS
Vehicle: 1996 Isuzu Hombre 2.2 L4 GAS
Trooper w/Four Wheel ABS
The anti-lock brake system works on all four wheels. A combination of wheel speed sensor and electronic brake control module (EBCM) determines when a wheel is about to stop turning and adjusts brake pressure to maintain best braking. This system helps the driver maintain greater control of the vehicle under heavy braking conditions.
Amigo, Pickup, Rodeo & Trooper w/Rear Wheel ABS
The rear wheel anti-lock (RWAL) system continuously monitors rear wheel rotation during braking and corrects rear ...
CLICK HERE TO GET FULL ACCESS TO 1996 Isuzu Hombre BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Isuzu Hombre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Isuzu Hombre cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> Brake Pedal -> Parking Brake -> Rear Disc Brakes -> Rear Drum Brakes -> Service Brake -> Stylus
Vehicle: 1996 Isuzu Hombre 2.2 L4 GAS
Brake Pedal
Stylus
Measure the brake pedal height after making sure the pedal is fully released by the pedal return spring. Measure pedal height as shown in Fig. , dimension " L." Measurement should be 6.22 inches. If measurement is not as specified, proceed as follows:
- Loosen the stop lamp switch.
- Loosen locknut on the pushrod.
- Adjust the pushrod to the specified pedal height.
- Tighten locknut.
Amigo, Hombre, Pickup & Rodeo
- Measure brake pedal height and freeplay, Fig. , with brake pedal fully released.
- Pedal height should be 6.85-7.24 inches. Pedal freeplay should be .23-.35 inch.
- If measurem...
CLICK HERE TO GET FULL ACCESS TO 1996 Isuzu Hombre BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Isuzu Hombre AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Isuzu Hombre cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1993 -> 1993-95 Amigo, Pickup, Rodeo & Trooper w/Rear Wheel ABS -> 1994-95 -> 1996 Rodeo w/Four Wheel Anti-Lock Brakes -> Accessing Diagnostic Trouble Codes -> Accessing Diagnostic Trouble Codes, Less Tech 1 Scan Tool -> Accessing DTCs w/Tech 1 Scan Tool -> Clearing Diagnostic Trouble Codes -> Clearing DTCs w/Tech 1 Scan Tool -> Clearing DTCs, Less Tech 1 Scan Tool -> Diagnosis By Symptom -> Diagnostic Circuit Check -> Diagnostic Trouble Code Interpretation -> Hombre -> Pinout Tests -> Self-Diagnosis -> Trooper w/Four Wheel Anti-Lock Brakes -> Warning Lamp Diagnosis -> Wiring Circuits
Vehicle: 1996 Isuzu Hombre 2.2 L4 GAS
Some diagnostic procedures require that the ignition switch remain on for extended periods of time while tests are performed. Low battery voltage may result, causing erroneous voltage readings. If vehicle system voltage becomes low, it is advisable to connect a battery charger and apply a slow charge while testing.
1993-95 Amigo, Pickup, Rodeo & Trooper w/Rear Wheel ABS
Self-Diagnosis
The RWAL system performs a self-check every time the ignition key is turned from OFF to ON position. The system check consists of the following:
- Checks the rear anti-lock light by illuminating for ...
CLICK HERE TO GET FULL ACCESS TO 1996 Isuzu Hombre BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
