Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Subaru Impreza car and truck
repair procedures including Subaru engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1996 Subaru Impreza automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1996 Subaru Impreza
- 1996 Subaru Impreza L 1.8 H4 GAS, CC:1781, Fuel Injection, Engine VIN:, Desg:2
- 1996 Subaru Impreza L 1.8 H4 GAS, CC:1781, Fuel Injection, Engine VIN:, Desg:1
- 1996 Subaru Impreza L 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:4
- 1996 Subaru Impreza LX 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:4
- 1996 Subaru Impreza Outback 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:4
- 1996 Subaru Impreza Brighton 1.8 H4 GAS, CC:1781, Fuel Injection, Engine VIN:, Desg:2
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Subaru Impreza cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1996 Subaru Impreza Outback 2.2 H4 GAS
- Disconnect ground cable from battery.
- Move selector lever or gear shift lever to "N".
- Release parking brake.
- Jack up vehicle and support it with sturdy racks.
- Remove rear exhaust pipe and muffler.
- Remove front exhaust cover.
- Remove differential mount front cover.
- Remove four bolts which hold propeller shaft to rear differential. Put matching marks on affected parts before removal. Remove all but one bolt.
- Remove two bolts which hold center bearing to car body.
- Place a s...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Subaru Impreza cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Installation -> Removal
Vehicle: 1996 Subaru Impreza L 1.8 H4 GAS
Removal
- Put matching marks on affected parts.
- Remove bolts which hold front propeller shaft to rear propeller shaft.
- Place companion flange in a vise and remove stake nut. Be sure not to hold propeller shaft pipe portion in vise.
- Drive out companion flange with a puller or press. Before disassembling, put matching mark on affected parts.
- Lightly tap head of front propeller shaft with a copper hammer u...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Subaru Impreza cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Installation -> Removal
Vehicle: 1996 Subaru Impreza Brighton 1.8 H4 GAS
Removal
- Put matching marks on affected parts.
- Remove bolts which hold front propeller shaft to rear propeller shaft.
- Place companion flange in a vise and remove stake nut. Be sure not to hold propeller shaft pipe portion in vise.
- Drive out companion flange with a puller or press. Before disassembling, put matching mark on affected parts.
- Lightly tap head of front propeller shaft with a copper hammer u...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Subaru Impreza cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1996 Subaru Impreza L 2.2 H4 GAS
- Disconnect ground cable from battery.
- Move selector lever or gear shift lever to "N".
- Release parking brake.
- Jack up vehicle and support it with sturdy racks.
- Remove rear exhaust pipe and muffler.
- Remove front exhaust cover.
- Remove differential mount front cover.
- Remove four bolts which hold propeller shaft to rear differential. Put matching marks on affected parts before removal. Remove all but one bolt.
- Remove two bolts which hold center bearing to car body.
- Place a s...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Subaru Impreza cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Installation -> Removal
Vehicle: 1996 Subaru Impreza Outback 2.2 H4 GAS
Removal
- Put matching marks on affected parts.
- Remove bolts which hold front propeller shaft to rear propeller shaft.
- Place companion flange in a vise and remove stake nut. Be sure not to hold propeller shaft pipe portion in vise.
- Drive out companion flange with a puller or press. Before disassembling, put matching mark on affected parts.
- Lightly tap head of front propeller shaft with a copper hamme...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Subaru Impreza AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Subaru Impreza cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1996 Subaru Impreza Brighton 1.8 H4 GAS
- Disconnect ground cable from battery.
- Move selector lever or gear shift lever to "N".
- Release parking brake.
- Jack up vehicle and support it with sturdy racks.
- Remove rear exhaust pipe and muffler.
- Remove front exhaust cover.
- Remove differential mount front cover.
- Remove four bolts which hold propeller shaft to rear differential. Put matching marks on affected parts before removal. Remove all but one bolt.
- Remove two bolts which hold center bearing to car body.
- Place a s...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Impreza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
