Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Chevrolet P30 VAN car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Chevrolet P30 VAN automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1997 Chevrolet P30 VAN
- 1997 Chevrolet P30 VAN 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:R
- 1997 Chevrolet P30 VAN 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:W
- 1997 Chevrolet P30 VAN 7.4 V8 GAS, CID:454, Fuel Injection, Aspiration:454, Engine VIN:, Desg:N
- 1997 Chevrolet P30 VAN 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:F
- 1997 Chevrolet P30 VAN 7.4 V8 GAS, CID:454, Fuel Injection, Aspiration:454, Engine VIN:, Desg:J
- 1997 Chevrolet P30 VAN 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:Y
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet P30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet P30 VAN cars and light trucks from 1990+.
Anti-lock Brakes -> Kelsey-Hayes -> Description
Vehicle: 1997 Chevrolet P30 VAN 6.5 V8 DIESEL
This system is used on all models except Montana, Silhouette, Tracker, Trans Sport and Venture. On 2000 S & T Series , four door utility vehicles can be equipped with either a 310 or 325 ABS system. Pickups and two-door utility vehicles are equipped with 310 ABS systems. While both systems are functionally the same, the 310 differs in size and appearance from the 325. It is designed to reduce the occurrence of wheel lock-up during severe braking conditions. To accomplish this function, the system regulates hydraulic brake line pressure by using an Electro-Hydraulic Control Unit (EHC...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet P30 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet P30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet P30 VAN cars and light trucks from 1990+.
Disc Brakes -> Bendix Single Piston Sliding Caliper -> Brake System Bleed
Vehicle: 1997 Chevrolet P30 VAN 7.4 V8 GAS
Refer to "Hydraulic Brake... "
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet P30 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet P30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet P30 VAN cars and light trucks from 1990+.
Power Brake Units -> Bendix Brake Booster -> Troubleshooting -> Accumulator Leak-Down, System Does Not Hold Charge -> Grabby Brakes Or Booster Chatters/Pedal Vibrates -> Slow Brake Pedal Return
Vehicle: 1997 Chevrolet P30 VAN 6.5 V8 DIESEL
Slow Brake Pedal Return
- Excessive seal friction in booster.
- Faulty spool action.
- Restriction in return line from booster to pump reservoir.
- Damaged input rod end.
Grabby Brakes Or Booster Chatters/Pedal Vibrates
- Faulty spool action caused by contamination in sys...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet P30 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet P30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet P30 VAN cars and light trucks from 1990+.
Disc Brakes -> Bendix Dual Piston Sliding Caliper -> Brake System Bleed
Vehicle: 1997 Chevrolet P30 VAN 6.5 V8 DIESEL
Refer to "Hydraulic Brake... "
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet P30 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet P30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet P30 VAN cars and light trucks from 1990+.
Power Brake Units -> Bendix Brake Booster -> Power Brake Unit Service -> Accumulator Service -> Assemble -> Booster Bleed -> Cleaning & Inspection -> Disassemble
Vehicle: 1997 Chevrolet P30 VAN 4.3 V6 GAS
Disassemble
- Place accumulator compressor tool No. J-26889, or equivalent, around end of accumulator.
- Install nut onto stud as shown in Fig. , then depress the accumulator with a C-clamp.
- Remove retainer by using a punch.
- Release C-clamp and remove accumulator compressor tool.
- Remove accumulator, O-ring, retainer, plug and spring, Fig. .
- Remove retainer, output pushrod, baffle, piston return spring and retainer.
- Using a suitable saw, cut off eyelet of pedal rod, then remove the boot.
- Remove nut, bracket and bolts, then separate cover from housing.
- Remove piston assembly and seal...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet P30 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Chevrolet P30 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Chevrolet P30 VAN cars and light trucks from 1990+.
Disc Brakes -> Bendix Single Piston Sliding Caliper -> Rotor Replacement -> 2WD Models -> 4WD Models
Vehicle: 1997 Chevrolet P30 VAN 5.7 V8 GAS
2WD Models
- Raise and support vehicle.
- Remove tire and wheel.
- Remove caliper as outlined under "Caliper Service."
- Remove axle cap bolts from hub/rotor, then axle shaft.
- Remove axle outer locknut, washer and adjuster nut.
- Remove hub/rotor from spindle, Fig. . Do not damage spindle threads or outer bearing.
- Reverse procedure to install, noting the following:
- Inspect and replace parts and apply high-temperature wheel bearing grease where necessary.
- Torque inner wheel bearing adjusting nut to 50 ft. lbs. to seat bearings.
- Back off adjusting nut to torque if 35 ft. lbs. while rotating hub.
- Final...
CLICK HERE TO GET FULL ACCESS TO 1997 Chevrolet P30 VAN BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
