Auto Parts Search
We have info for following modifications of 1997 Ford Mustang
- 1997 Ford Mustang 3.8 V6 GAS, CID:232, Fuel Injection, Aspiration:232, Engine VIN:, Desg:4
- 1997 Ford Mustang GT 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:X
- 1997 Ford Mustang Cobra 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:V
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Ford Mustang AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Ford Mustang cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1997 Ford Mustang Cobra 4.6 V8 GAS
- To maintain balance, mark relationship of rear driveshaft yoke and drive pinion flange of axle if factory alignment marks are not visible.
- Disconnect rear U-joint from companion flange.
- Wrap tape around loose bearing caps to prevent them from falling off spider.
- Pull driveshaft toward rear of car until slip yoke clears transmission extension housing and seal.
- Install suitable plug into extension housing to prevent...
CLICK HERE TO GET FULL ACCESS TO 1997 Ford Mustang DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Ford Mustang AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Ford Mustang cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1997 Ford Mustang GT 4.6 V8 GAS
- To maintain balance, mark relationship of rear driveshaft yoke and drive pinion flange of axle if factory alignment marks are not visible.
- Disconnect rear U-joint from companion flange.
- Wrap tape around loose bearing caps to prevent them from falling off spider.
- Pull driveshaft toward rear of car until slip yoke clears transmission extension housing and seal.
- Install suitable plug into extension housing to prevent...
CLICK HERE TO GET FULL ACCESS TO 1997 Ford Mustang DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Ford Mustang AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Ford Mustang cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1997 Ford Mustang 3.8 V6 GAS
- To maintain balance, mark relationship of rear driveshaft yoke and drive pinion flange of axle if factory alignment marks are not visible.
- Disconnect rear U-joint from companion flange.
- Wrap tape around loose bearing caps to prevent them from falling off spider.
- Pull driveshaft toward rear of car until slip yoke clears transmission extension housing and seal.
- Install suitable plug into extension housing to prevent...
CLICK HERE TO GET FULL ACCESS TO 1997 Ford Mustang DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1997 Ford Mustang vehicle. |
Access the Complete guide! |